Unfortunately this is still not working. I compiled the code for base and sensor node by using:
SENSORBOARD=micasb make iris It was fine. Hoever, the base and sensor node (I have used only these two) none of them is blinking LEDs for send or receive. Nor did Java console show any receptions. As far as I understand the sensing should go on even if the node doesn't have any sensors. The return value is simply 0xffff. Can anyone provide a step by step how to make it work on Iris motes? The README doesn't help much with this detail. David On Tue, Sep 1, 2009 at 12:06 PM, Michael Schippling <[email protected]>wrote: > You can set SENSORBOARD=micasb in the makefile, > you will probably just get garbage data but I don't > think there's anything that will hang up. > > The "make <mote>" thing means to type the command > make and your device type, so: > make iris > to build your program for the iris devices. > > I think most of this is covered in the doc/tutorial. > > MS > > David Li wrote: > >> Hi, >> >> I am using this on Iris motes without any sensing boards. The ReadMe says >> to compile with default sensor using "SENSORBOARD=<sensorboard name> make >> <mote>". My questions are: >> >> 1. How should I set "sensorboard name"? >> 2. How should I set "mote"? Any string will do? >> 3. Should this line be added to the Makefile? >> >> I did a quick try without using this line and didn't see anything from the >> Java GUI. Was this the problem of missing the above settings? >> >> Thanks. >> >> David >> >> >> ------------------------------------------------------------------------ >> >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
