Hi, Since Deluge manual doesn't provide any micaz install command. It could be something wrong with the command I typed. But i tried different combination. It still had the same error. So I reckon it has nothing to do with this command.
Regards, Bai On Wed, Sep 9, 2009 at 2:03 PM, Razvan Musaloiu-E. <[email protected]>wrote: > Hi! > > > On Wed, 9 Sep 2009, BAI LI wrote: > > Hi, >> >> I have followed the intructions from the Deulge tutorial and also >> installed >> pyserial tools as required. I met the following error when i tried to >> inject >> blink image to micaz >> >> administra...@jujumao /opt/tinyos-2.x/apps/tests/deluge/Blink >> $ tos-deluge /dev/ttyS5:115200 -i 1 build/micaz/tos-image.xml >> Traceback (most recent call last): >> File "/usr/local/bin/tos-deluge", line 401, in <module> >> am = tos.AM() >> TypeError: __init__() takes exactly 2 arguments (1 given) >> >> It is the latest CVS. What could cause this problem? >> >> > Can you run tos-deluge and see if the output is like this? > > $ tos-deluge > Usage: /home/lpl/local/bin/tos-deluge <source> <-p|-i|-r|-d|-e|-s> > image_number [options] > <source> can be: > ser...@port:SPEED Serial ports > netw...@host:PORT MIB600 > -p --ping Provide status of the image in the external flash > -i --inject Inject a compiled TinyOS application > [options]: tos_image.xml file path > -e --erase Erase an image in the external flash > -b --boot Force a reboot of the mote > -r --reprogram Reprogram the mote > -d --disseminate Disseminate the image in the external flash to > the network > -dr --disseminate-and-reprogram > -s --stop Stop the dissemination > -ls --local-stop Stop the dissemination only on the local mote > > If it's not then you are not running the latest CVS. :-) > > -- > Razvan ME >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
