Razvan Musaloiu-E. wrote:
> Hi!
>
> Can you give a try to the deluge-mica2 head from the GIT tree from here: [...]
>
Unfortunately I've been unable to get to the hardware needed for trying
until now. I'm very sorry for the delay especially since you are so
graciously trying to help me.
Since I now have access to the mica2's again here is what I found:
I downloaded the tinyos-2.x tree from your git repository. Then I
followed the Deluge T2 guide (install tools and PySerial).
Using a modified version of Blink's burn script [1] to enable target mica2
./burn mib510,/dev/ttyS2 serial@/dev/ttyS3:57600 mica2
everything runs through without warnings or errors. Since it takes about
~7 minutes to upload the image (is it supposed to take this long for
that small a program?)
I figure that part works. After that the mote reboots as it should.
Unfortunately it does not load the new image when it does.
A full log of burn's output can be found at [2].
Sending a reboot command manually to flash the stored burn image with
tos-deluge serial@/dev/ttyS3 -r 1
reboots the node but does not change the program running (at the very
least not the leds blinking).
I then tried to modifiy the burn script's inject command to inject an
image to slot 2 instead of 1 (a new Blink using 2 leds instead of just 1)
tos-deluge serial@/dev/ttyS3 -r 1 and tos-deluge serial@/dev/ttyS3 -r 2
This should then change between stored images - which does not work.
Also, there is no indicator as to why.
Next thing I tried is to disseminate and reprogram other motes (in case
there is only one image allowed at a time but this one is there and works).
As directed by the Deluge T2 Tutorial I flashed the GoldenImage to 2
other nodes and instructed the basenode (created by burn) with
tos-deluge serial@/dev/ttyS3 -dr 1
to work it's magic. Which did not show any results for 30mins - after
which I finally gave up.
A ping of both used slots can be found at [3].
Did I do something wrong at some point? What can I do to give you more
of an idea what's (not) happening?
Greetings,
BB
[1] http://www.pastehere.com/?wqmxig
[2] http://www.pastehere.com/?cftplk
[3] http://www.pastehere.com/?jghrvn
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
