hi, I had created a custom node earlier and interfaced some sensors with it. In order to observe the received data on the PC i have connected the mote to COM1 using the DB9(serial) connector. Now the probelm is observing the packets:
- when i use the listen command resynchronizing appears and nothing happens - When I opened up Hyperterminal, all I could get was ASCII characters, but still, something was being received. - then i installed RealTerm that can display the received packets on COM1 in Hex. Now the issue is that I dont understand the format of the packets: When I run the BlinkToRadio Application on the remote node, this is what i get on RealTerm: BE A5 80 FF FF FF FF 84 80 86 80 81 80 81 91 FD BE BE A5 80 FF FF FF FF 84 80 86 80 81 80 82 A2 ED BE BE A5 80 FF FF FF FF 84 80 86 80 81 80 83 B3 FD BE . . . I dont understand what the initial part is and why it is being repeated. Kindly help me with this! Thanks in advance Farooq Sultan -- View this message in context: http://www.nabble.com/serial-comm-tp25852305p25852305.html Sent from the TinyOS - Help mailing list archive at Nabble.com. _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
