That seems right, but unfortunately I've only used the ADCs on mica
devices and the telos has some differently-abled config options at
which I haven't looked carefully. Cut-Paste-Experiment is indicated.
MS
David Conde wrote:
> Hi again,
>
> I have read about the Sensing examples in tinyos1.x/apps folder and found
> Sense and Oscilloscope.If I have not missunderstand, if I wanted to
> integrate a new analog sensor to TelosB, I should create a new MySensor
> component whose Module MyADCSensorM file uses ADCControl in order to be able
> to call :
>
> call ADCControl.bindPort(MY_ADC_MAP_PORT,
> ACTUAL_MY_ADC_PORT);
>
> Where MY_ADC_MAP_PORT would be defined in MYADCSensor.h
>
> MyADCSensor.h
>
> enum
> {
> MY_ADC_MAP_PORT = unique("ADCPort"),
>
> ACTUAL_MY_ADC_PORT = ASSOCIATE_ADC_CHANNEL(
> INPUT_CHANNEL_A1,
> REFERENCE_VREFplus_AVss,
> REFVOLT_LEVEL_1_5
> )
> };
>
> All what I should do it would be to change the Hamamatsu Component in order
> to change the INPUT_CHANNEL4 OR INPUT_CHANNEL5 by INPUT_CHANNEL1 or
> INPUT_CHANNEL2 , INPUT_CHANNEL3, which are the free channels for ADC
> ports..., do I have to do anything more, or am I missing anything?
>
> Thank you in advance
>
>
>
> -----Mensaje original-----
> De: Michael Schippling [mailto:[email protected]]
> Enviado el: martes, 13 de octubre de 2009 19:28
> Para: David Conde
> CC: [email protected]
> Asunto: Re: [Tinyos-help] How could I configure what sensor to get data from
> in my Telosb ?
>
> Look at the ADC modules and their use in various demo apps,
> e.g., Sense. You'll need to rummage around in the platform
> directories to see the actual DemoSensor implementation.
> If all you need to do is sample an analog input it should
> be a straight-forward swap of ADCC for DemoSensor in the
> config and then using getData() & dataReady() in your code.
>
> MS
>
> David Conde wrote:
>> Hi Michael,
>>
>> Thank you for your answer, it was very helpful for me.
>>
>> I perfectly understood how I have to do it with your explanation.
>>
>> What about if I try connect a sensor with analog output, would it be the
>> same process as digital one?
>>
>> I mean, if I would like to use a Sensor with analog output, I would place
> it
>> in ADC2 (analog Input 2, which is the same pin as GIO1), could I use the
>> same component (MSP430GeneralIO) with the same method as you told me
>> before?How can Tinyos make the difference between use ADC2 and GIO1 if
> both
>> of them are connected together?
>>
>> Can I suppose that by default no pin in 10 Extensor pin connector is used
> if
>> I have not matched in MyApplication configuration component? I mean, I
> could
>> use GIO4, GIO5 and GIO3 as the same way as I would use GIO1?
>>
>> I am using Tinyos1.x with Telosb motes.
>>
>>
>> Thank you in advance and I am sorry for so many questions
>>
>>
>> -----Mensaje original-----
>> De: Michael Schippling [mailto:[email protected]]
>> Enviado el: lunes, 12 de octubre de 2009 18:45
>> Para: chuso
>> CC: [email protected]
>> Asunto: Re: [Tinyos-help] How could I configure what sensor to get data
> from
>> in my Telosb ?
>>
>> You don't say what version of TOS you are using
>> and I only know T1, but this is what I did to
>> read a pin, and it might be the same in T2.
>> Note that the Port23 name means Port 2 bit 3,
>> so figure out what port/pin you want and use it:
>>
>> In the config file:
>> MyApp.USIn0 -> MSP430GeneralIOM.Port23;
>>
>> In the MyApp appication code file:
>> in the provides/uses block at the top:
>> uses interface MSP430GeneralIO as USIn0; // PORT23
>> ...
>> in init():
>> call USIn0.makeInput();
>> call USIn0.selectIOFunc();
>>
>> where you want to use it:
>> // look at input value
>> if( call USIn0.get() == FALSE )
>>
>>
>> MS
>>
>> chuso wrote:
>>> Hi again,
>>>
>>> I have been reading the code in oscilloscope and I found TempHum
> component
>>> which models the Sensirion Temperature and Humidity sensors, althoug I
> did
>>> not understand very well what exactly this component does.
>>>
>>> I found either the hardware schema of Telosb and I saw that there is 4
>> GIO,
>>> both of them (GIO2 and GIO3) are connected with ADC2 and ADC3 together.
>> With
>>> this, I would like to integrate a PIR sensor, which have digital output.
>> I
>>> have thought connect this digital output to the GIO1, which is connected
>>> with ADC2 IO. What do I have to do to get the data from this GIO?I mean,
>> how
>>> I have to configure the hardware.h or whatever other NesC component in
>> order
>>> to achieve to get data from this GIO without to cause error in the other
>>> funcionalities?
>>>
>>> Thank you in advance
>>>
>>>
>>> Michael Schippling-2 wrote:
>>>> Most of the example apps use a DemoSensor component as the data source.
>>>> Each platform has a different implementation, depending on the native
>>>> sensors available. You can just replace DemoSensor with an appropriate
>>>> ADC in the config file. Dig through the code to find the DemoSensor
>>>> implementation that your system is using, or search for other uses of
>>>> ADC, to see a usage example
>>>>
>>>> MS
>>>>
>>>> David Conde wrote:
>>>>> Hi,
>>>>>
>>>>>
>>>>>
>>>>> I have been Reading about ADC component and Oscilloscope application
> and
>>>>> I would like to know how I can change the sensor to get data from, I
>>>>> mean, I am working with TelosB, and it has three sensor to get data
> from
>>>>> them. I would like to change the configuration on Oscilloscope to get
>>>>> data from Humidity sensor instead of light sensor and to know how could
>
>>>>> I include a new digital sensor as a PIR sensor using TelosB mote?
>>>>>
>>>>>
>>>>>
>>>>> Thanks in advance
>>>>>
>>>>>
>>>>>
> ------------------------------------------------------------------------
>>>>> _______________________________________________
>>>>> Tinyos-help mailing list
>>>>> [email protected]
>>>>>
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>>>> _______________________________________________
>>>> Tinyos-help mailing list
>>>> [email protected]
>>>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>>>>
>>>>
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
