Hi,
I have read about this article: "Writing low-power application" (http://docs.tinyos.net/index.php/Writing_Low-Power_Applications) in Tinyos.net and I would like to know if TinyOS 1.x make all this by itself or I have to make sure to do it myself as developer. I mean, TinyOS 1.x does the next actions by itself when a simple is asked by a component or do I have to do it?: Turn on SPI bus Turn on flash chip Turn on voltage reference Turn on I2C bus Log prior readings Start humidity sample Wait 5ms for log Turn off flash chip Turn off SPI bus Wait 12ms for vref Turn on ADC Start total solar sample Wait 2ms for total solar Start photo active sample Wait 2ms for photo active Turn off ADC Turn off vref Wait 34ms for humidity Start temperature sample Wait 220ms for temperature Turn off I2C bus What does it happen with the radio operation? Does TinyOS 1.x provide low power operation through the Low Power Listening technique, or do I have to implement by myself as developer? And Finally, what about the sensor in Telosb, Does TinyOS 1.x switch off the sensor when they are not taken measure from the environment automatically? Thanks in advance Thanks in advance
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
