Hi-- Please send your help messages to tinyos-help, in the future. Blip isn't currently supported on windows; you'll have to use the linux vm image until we get windows support straightened out. I would also recommend that you use blip out of core (tinyos-2.x) and not contrib (tinyos-2.x-contrib)-- now that blip is integrated into core, blip in contrib will no longer be supported.
I believe your problem is related to the buffer size on micazs-- it has less memory so you need to use fewer buffers. Using the version from core will do this automatically. Steve 2009/10/26 duhaiyingabc <[email protected]>: > Dear friend: > I have read you from the Internet.I am a Chinese student. > Now I am testing blip on micaz motes,but i cannot succeed. > my soft enviroment:Tinyos-2.1.1+WinXP/Cygwin > hardware: MIB520+micaz mote > I have fllowed the Blip Tutorail to insall the ER and Router,but I cannot > Ping6 or tancert succedly. > I am not sure if my configuration is right.and I am mot sure if the OS is > key for blip.Do I need to do some change?Or do i need install some driver in > the winXP? I am confused. > I even have insall xubutos and use CVS update the > tingyos2.1-contrib-blip,but i feel sorry i cannot run the blip on micaz > under the xubuntos. > > Please give me some advices.I am looking forward about your reply.Thanks > very much. > > ps:commond: ./bootstrap cannot excute correctly. > > > > > -- > > 祝： > 一切顺利！ 杜海颖 > > > ________________________________ > 09年新晋3D主流网游《天下贰》，网易六年亿资打造 -- stephen dawson-haggerty http://cs.berkeley.edu/~stevedh uc berkeley wireless and embedded systems lab berkeley, ca 94720 _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
