Also make sure that your mote is switch off while your are trying to 
flash it. Some times such errors could occur when mote is busy.

Faisal

Paul Johnson wrote:
> Try typing just "make mica2" and see what how much RAM and Program Flash 
> required for your program.  It should be displayed at the end of the 
> build process.
>
> If you're trying to flash the motes w/ a program that exceeds these 
> limits, then it's very likely that you're having these issues.
>
> -Paul
>
> Ronny Stangl wrote:
>   
>> Hi @ all,
>>
>> I just received some mica2 motes from Crossbow with a MIB510CA platform.
>> (more precisely: I use the modified hardware, named Cricket)
>>
>> When i try to load  an application on the motes (e.g. Blink),
>> I get the following  error:
>> --------------------------------------------------------------------
>> ...
>> Atmel AVR ATmega128 is found.
>> Verifying: flash
>> flash error at address 0x0: file=0x0c, mem=0xff
>> ...
>> flash error at address 0x66b: file=0x00, mem=0xff
>> --------------------------------------------------------------------
>>
>> I have read a lot of articles from the Tinyos-help mailing list...
>> but nothing works.
>>
>> I used:
>> MIB510=/dev/ttyS3 make mica2 reinstall,mib510  (and yes, the ttyS3 is 
>> the port that I have to use ;-) )
>>
>> or
>>
>> make mica2 install mib510,ttyS3
>>
>> or
>>
>> make mica2 install mib510,com4
>>
>>
>> If I try it on this way:
>> ./main -dprog=mib510 -dserial=/dev/ttyS3 -dpart=ATmega128 --wr_fude_e=ff 
>> --erase --upload if=main.srec
>>
>> The error message is
>>      program to big for the RAM
>> or
>>      The NTVDM-CPU has detect a illegal command
>>      CS:10ad IP:019a OP:63 00 0c 94 63
>>
>> I hope somebody have a solution :-)
>>
>>
>>   
>>     
>
> _______________________________________________
> Tinyos-help mailing list
> [email protected]
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
>
>   

_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

Reply via email to