Hi,
I'm using now Snow Leopard.
I installed toolchain from: http://hinrg.cs.jhu.edu/git/?p=ports.git
But I have the same problem with Iris:
Andrese-MBP:Blink Andres$ make iris install.0 mib510,/dev/tty.usbserial
mkdir -p build/iris
compiling BlinkAppC to a iris binary
ncc -o build/iris/main.exe -Os -fnesc-separator=__ -Wall -Wshadow -Wnesc-all
-target=iris -fnesc-cfile=build/iris/app.c -board=micasb
-DDEFINED_TOS_AM_GROUP=0x22 --param max-inline-insns-single=100000
-DIDENT_APPNAME=\"BlinkAppC\" -DIDENT_USERNAME=\"Andres\"
-DIDENT_HOSTNAME=\"Andrese-MBP.loc\" -DIDENT_USERHASH=0xb6e8c730L
-DIDENT_TIMESTAMP=0x4b139a44L -DIDENT_UIDHASH=0xe22260dfL -fnesc-dump=wiring
-fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs,
components)' -fnesc-dumpfile=build/iris/wiring-check.xml BlinkAppC.nc -lm
compiled BlinkAppC to build/iris/main.exe
2268 bytes in ROM
51 bytes in RAM
avr-objcopy --output-target=srec build/iris/main.exe build/iris/main.srec
avr-objcopy --output-target=ihex build/iris/main.exe build/iris/main.ihex
writing TOS image
tos-set-symbols build/iris/main.srec build/iris/main.srec.out-0 TOS_NODE_ID=0
ActiveMessageAddressC__addr=0
Could not find data section in build/iris/main.exe, aborting.
Could not find symbol ActiveMessageAddressC__addr in build/iris/main.exe,
ignoring symbol.
Could not find symbol TOS_NODE_ID in build/iris/main.exe, ignoring symbol.
installing iris binary using mib510
avrdude -cmib510 -P/dev/tty.usbserial -U hfuse:w:0xd9:m -pm1281 -U
efuse:w:0xff:m -C/etc/avrdude/avrdude.conf -U
flash:w:build/iris/main.srec.out-0:a
make: avrdude: No such file or directory
make: *** [program] Error 1
Except now it says No such file or directory instead of Command not found.
There is something broken, but what?
Andres Vahter
On 06.10.2009, at 9:49, Andres Vahter wrote:
> Hi,
>
> I tried to install Null app to Iris to see if avrdude works.
>
> Make works fine:
> Andrese-MBP:Null Andres$ make iris
> mkdir -p build/iris
> compiling NullAppC to a iris binary
> ncc -o build/iris/main.exe -Os -fnesc-separator=__ -Wall -Wshadow -Wnesc-all
> -target=iris -fnesc-cfile=build/iris/app.c -board=micasb
> -DDEFINED_TOS_AM_GROUP=0x22 --param max-inline-insns-single=100000
> -DIDENT_APPNAME=\"NullAppC\" -DIDENT_USERNAME=\"Andres\"
> -DIDENT_HOSTNAME=\"Andrese-MBP.loc\" -DIDENT_USERHASH=0xb6e8c730L
> -DIDENT_TIMESTAMP=0x4acae441L -DIDENT_UIDHASH=0x875b20c9L -fnesc-dump=wiring
> -fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs,
> components)' -fnesc-dumpfile=build/iris/wiring-check.xml NullAppC.nc -lm
> compiled NullAppC to build/iris/main.exe
> 748 bytes in ROM
> 4 bytes in RAM
> avr-objcopy --output-target=srec build/iris/main.exe build/iris/main.srec
> avr-objcopy --output-target=ihex build/iris/main.exe build/iris/main.ihex
> writing TOS image
>
> Uploading to Iris doesn't work:
> Andrese-MBP:Null Andres$ make iris install mib510,/dev/tty.usbserial
> mkdir -p build/iris
> compiling NullAppC to a iris binary
> ncc -o build/iris/main.exe -Os -fnesc-separator=__ -Wall -Wshadow -Wnesc-all
> -target=iris -fnesc-cfile=build/iris/app.c -board=micasb
> -DDEFINED_TOS_AM_GROUP=0x22 --param max-inline-insns-single=100000
> -DIDENT_APPNAME=\"NullAppC\" -DIDENT_USERNAME=\"Andres\"
> -DIDENT_HOSTNAME=\"Andrese-MBP.loc\" -DIDENT_USERHASH=0xb6e8c730L
> -DIDENT_TIMESTAMP=0x4acae48dL -DIDENT_UIDHASH=0xd74413d4L -fnesc-dump=wiring
> -fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs,
> components)' -fnesc-dumpfile=build/iris/wiring-check.xml NullAppC.nc -lm
> compiled NullAppC to build/iris/main.exe
> 748 bytes in ROM
> 4 bytes in RAM
> avr-objcopy --output-target=srec build/iris/main.exe build/iris/main.srec
> avr-objcopy --output-target=ihex build/iris/main.exe build/iris/main.ihex
> writing TOS image
> cp build/iris/main.srec build/iris/main.srec.out
> installing iris binary using mib510
> avrdude -cmib510 -P/dev/tty.usbserial -U hfuse:w:0xd9:m -pm1281 -U
> efuse:w:0xff:m -C/etc/avrdude/avrdude.conf -U
> flash:w:build/iris/main.srec.out:a
> make: avrdude: Command not found
> make: *** [program] Error 127
>
> Uploading to micaz works fine (Blink app):
> Andrese-MBP:Blink Andres$ make micaz install.0 mib510,/dev/tty.usbserial
> mkdir -p build/micaz
> compiling BlinkAppC to a micaz binary
> ncc -o build/micaz/main.exe -Os -fnesc-separator=__ -Wall -Wshadow
> -Wnesc-all -target=micaz -fnesc-cfile=build/micaz/app.c -board=micasb
> -DDEFINED_TOS_AM_GROUP=0x22 --param max-inline-insns-single=100000
> -DIDENT_APPNAME=\"BlinkAppC\" -DIDENT_USERNAME=\"Andres\"
> -DIDENT_HOSTNAME=\"Andrese-MBP.loc\" -DIDENT_USERHASH=0xb6e8c730L
> -DIDENT_TIMESTAMP=0x4acae6a4L -DIDENT_UIDHASH=0x8fcd8a2bL -fnesc-dump=wiring
> -fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs,
> components)' -fnesc-dumpfile=build/micaz/wiring-check.xml BlinkAppC.nc -lm
> compiled BlinkAppC to build/micaz/main.exe
> 2052 bytes in ROM
> 51 bytes in RAM
> avr-objcopy --output-target=srec build/micaz/main.exe build/micaz/main.srec
> avr-objcopy --output-target=ihex build/micaz/main.exe build/micaz/main.ihex
> writing TOS image
> tos-set-symbols build/micaz/main.srec build/micaz/main.srec.out-0
> TOS_NODE_ID=0 ActiveMessageAddressC__addr=0
> Could not find data section in build/micaz/main.exe, aborting.
> Could not find symbol ActiveMessageAddressC__addr in build/micaz/main.exe,
> ignoring symbol.
> Could not find symbol TOS_NODE_ID in build/micaz/main.exe, ignoring symbol.
> installing micaz binary using mib510
> uisp -dprog=mib510 -dserial=/dev/tty.usbserial --wr_fuse_h=0xd9
> -dpart=ATmega128 --wr_fuse_e=ff --erase --upload
> if=build/micaz/main.srec.out-0 --verify
> Firmware Version: 2.1
> Atmel AVR ATmega128 is found.
> Uploading: flash
> Verifying: flash
>
> Fuse High Byte set to 0xd9
>
> Fuse Extended Byte set to 0xff
> rm -f build/micaz/main.exe.out-0 build/micaz/main.srec.out-0
>
>
> I wonder why uploading works with micaz but not with Iris? They both have
> allmost the same MCU.
>
> Andres Vahter
>
>
> On 05.10.2009, at 21:00, Razvan Musaloiu-E. wrote:
>
>> Hi!
>>
>> On Mon, 5 Oct 2009, Themis Bourdenas wrote:
>>
>>> Hi,
>>>
>>> I've just tried the ports. It works now for the msp430, haven't tried the
>>> avr yet.
>
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
