Hi, sorry, here are the details of my setup:
I have a 7,37MHz micaz mote on a mib510 gateway connected via usb to an Apple Computer (Mac OS X 10.4.11). The Blink application is running well, but the java application "TestSerial" (as mentioned in the tutorial) does not work as it should. Thanks a lot, Isa ------------------- > Isa, > > There can be many reasons why a mote doesn't receive a packet. Some > information about your setup would help us in debugging your problem. > What motes are you using, where the motes are located, etc, would be > helpful in trying to figure out why the nodes aren't able to communicate. > > For example, if you are using 900 MHz mica2 motes with mib520 gateways, > then it's likely that you forgot to tune the radio to a supported > frequency as by default, tinyos tunes the radio to a 433 MHz frequency. > > -Paul > > Isabelle Hang wrote: > > Hi, > > > > first, I want to thank for the great tutorial "Installing tinyos-2.x > > on Mac OS X". It was really helpful! > > > > I just have a problem with the output of the java application > > TestSerial. I got > > > > serial@/dev/tty.usbserial-XBQ0V814A:57600: resynchronising > > Sending packet 0 > > Sending packet 1 > > Sending packet 2 > > > > So, the received packets are obviously lost or non existent. > > > > After reading previous postings, I checked the on/off switch and it is > > OFF. > > > > Can anybody help me to find the problem? > > > > Thanks, > > Isa > > _______________________________________________ > > Tinyos-help mailing list > > [email protected] > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-he lp > > > _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
