Hi! On Tue, 12 Jan 2010, Vikram vik76 wrote:
> Hello, > I am trying to use Deluge T2 for MICAz motes. > I use the command as per the Deluge T2 tutorial at > http://docs.tinyos.net/index.php/Deluge_T2 > > ./burn mib510,/dev/ttyS0 serial@/dev/ttyS0:57600 micaz > > I get the following error during the Upload image process: > > =============================== Upload the image > =============================== > Flushing the serial port... > Checking if node is a Deluge T2 base station ... > > It hangs at this position of "Checking". > > I have connected the micaz mote using a programming board connected > using a serial cable. > Are you using the latest CVS? That's what I testes a few days ago and it was working fine. > Note: The similar thing works for tmote sky motes when I change > "micaz" to "telosb" in the burn command. Strange. Can you test if the serial communication works fine? > Therefore, is it possible that I use a tmote sky mote as basestation > and then reprogram the micaz motes as clients in the network? I haven't tested this but it should work. -- Razvan ME _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
