The Iris should be pin compatible with the mica2,z for which the MIB boards were initially designed. Just plug one iris into the MIB520. MS
chinmay lokesh wrote: > Hi, > > I have a WSN crossbow starter kit, I have installed and configured the > moteworks software and MIB520 works on COM5. I was looking to use the > MIB 520 available as part of BS to program sample applications like > MyApp given in moteworks starter guide. I have individual IRIS motes though > > Please advise if i can use the same pre-programmed kit for this work. If > incase i use the board will i lose the features that came initially with > kit. Do i have to reset the USB MIB520 before i load the MyApp code. > > Thanks > > CL > > > ------------------------------------------------------------------------ > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
