Dear All,
I am trying to communicate between two Mica2 motes, but these are not
communicating. I am using TinyOS 2.0.2 on Cygwin Win XP platform. I am able to
burn the Blink program and can watch the Leds glowing on the motes but when i
tested it with RadioCountToLeds, it doesn't work. I am able to simulate the
RadioCountToLeds using TOSSIM and it works fine.
For debugging purpose i inserted a -(call Leds.led0On();) in (AMSend.send)
event, a (call Leds.led0Off();) in (AMSend.sendDone) event and a (call
Leds.led2On();) in (Receive.receive) event. After burning the program the led 0
turn On and OFF indicating that the packets are sent from sender but the led 2
doesn't even glow up indicating that it didn't recieved anything.
Note: I didn't get any error during compilation or burning. I have even used
different identifiers to check if it was any problem with id, but didn't work.
I have small antennas on motes provided by xbow. Distance between motes is not
greater than 20 cm.During simulation of RadioCountToLeds packets are sent and
recieved properly. I've already checked the mailing archives for this problem
but none deals with TinyOS 2.0 version.
Any help would be appreciated.
Thank You
Vishram Mishra
Final Year, UnderGrad Student
Division Of Computer Engineering
Cochin University of Science And Technology
Your Mail works best with the New Yahoo Optimized IE8. Get it NOW!
http://downloads.yahoo.com/in/internetexplorer/_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
