Hi, All
I have a problem in setting up the mesh network through moteview/Xmesh. Background: Windows XP, Tinyos 2.x and Moteview 2.0. I plan to use total 8 MicaZ nodes including one sensor node working with mib510 gateway. First I was able to successfully download the Xmesh micaz\MTS300\XMTS300CB_2420_hp.exe program through Moteview “node configuration” to each node other than the base station node. I assigned node ID from 1 to 7 to each node. Then I set 0 to the base station one. And also download a different \MoteView\xmesh\micaz\XMeshBase\ XMeshBase_2420_hp.exe program to that. But after all these work, when I turn on the power of each node, all those nodes cannot form a mesh network. Looks like there is no communication within these nodes. And only the green light on the mib510 board keeps on. I opened the Moteview 2.0 GUI, and in the message error window, there is a message and said “XServer is not running. Process aborted: xserver2/bin/xserver.exe.” Anyone can help me? Why those Micaz sensor nodes cannot form a mesh network. Anything wrong with the switch position? BTW, the batteries are brand new ones. I appreciate any kind of help. Wendy
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
