Hello tinyos-help, I am using WinXP/Cygwin, iris motes with a mib520. I was able to compile the antitheft app, program the iris reference board with the root code and 3 other sensor nodes with the node code, and run Serial Forwarder GUI and the Antitheft GUI (with all options checked). However, once I turn on the sensor nodes all the leds are on and the Antitheft GUI keeps listing all the nodes in the window (i am assuming it is detecting all the nodes as stolen). I tried putting one sensor node in a drawer to signify it is stolen (no light), but the Antitheft GUI still detects all as stolen and in another trial (pressed update and starting over) packets are being read but no packets are written (Serial Forwarder GUI). The leds lights are all on in this case also. Two questions: 1. Any suggestions? 2. Which COM port should I use? I was using COM4 (to communicate with the nodes via the reference node which is connected through USB via the programming board; COM3 is used to program the iris). Should I be using the gateway to communicate instead? Which is COM6
Thank you, Suzanne _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
