On Mar 23, 2010, at 10:55 PM, Shahzad Malik wrote: > Dear all, First of all, I have to say that this is by far > the most active mailing list on TinyOS. So, keep it up! I am a research > assistant > working on "Body Sensor Network" applications and I was interested in > simulating > the behavior of nodes worn by patients in a typical hospital/clinic setting. > I read HyungJune's (special thanks to him for referring me to this mailing > list) IPSN'07 paper; "Improving Wireless Simulation Through Noise Modeling" > in which he used a TelosB to record RSSI values to develop an environmental > noise model. I was thinking of doing something similar but I only have > Imote2s > to play with and I am still very new to NesC and TinyOS so I am not sure > about what is required to port the code from TelosB to Imote2. [...]
Personally, I'd recommend just buying a single telosb. They're not that expensive. If you needed to run these experiments using your actual nodes (e.g., for real-time measurement) then it would be worth the effort, but if all you want is a few traces, having a sensing node is easier. Phil _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
