Hi,
I am using Ubuntu 9.1 and TinyOS 2.1.0, mib520 and one iris mote.
here is the output whn I try to program this iris mote with Blink
application
=============
g...@ubuntu:/opt/tinyos-2.1.0/apps/Blink$ make iris install,1
mib510,/dev/ttyUSB0
mkdir -p build/iris
compiling BlinkAppC to a iris binary
ncc -o build/iris/main.exe -Os -Wall -Wshadow -Wnesc-all -target=iris
-fnesc-cfile=build/iris/app.c -board=micasb -DDEFINED_TOS_AM_GROUP=0x22
--param max-inline-insns-single=100000 -DIDENT_APPNAME=\"BlinkAppC\"
-DIDENT_USERNAME=\"bosun\" -DIDENT_HOSTNAME=\"ubuntu\"
-DIDENT_USERHASH=0x0ccae4e2L -DIDENT_TIMESTAMP=0x4bc5d2b6L
-DIDENT_UIDHASH=0xecb88db2L -fnesc-dump=wiring
-fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs,
components)' -fnesc-dumpfile=build/iris/wiring-check.xml BlinkAppC.nc -lm
compiled BlinkAppC to build/iris/main.exe
2268 bytes in ROM
51 bytes in RAM
avr-objcopy --output-target=srec build/iris/main.exe build/iris/main.srec
avr-objcopy --output-target=ihex build/iris/main.exe build/iris/main.ihex
writing TOS image
tos-set-symbols build/iris/main.srec build/iris/main.srec.out-1
TOS_NODE_ID=1 ActiveMessageAddressC$addr=1
Could not find data section in build/iris/main.exe, aborting.
Could not find symbol ActiveMessageAddressC$addr in build/iris/main.exe,
ignoring symbol.
Could not find symbol TOS_NODE_ID in build/iris/main.exe, ignoring symbol.
installing iris binary using mib510
avrdude -cmib510 -P/dev/ttyUSB0 -U hfuse:w:0xd9:m -pm1281 -U efuse:w:0xff:m
-C/etc/avrdude/avrdude.conf -U flash:w:build/iris/main.srec.out-1:a
avrdude: stk500_recv(): programmer is not responding
make: *** [program] Error 1
==========\
Anyone can help me with it?
Thanks a lot,
Gary
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
