On Wed, Apr 14, 2010 at 11:31 AM, David Li <[email protected]> wrote: > Hi Om_p: > > Thanks for the pointer. I turned on the serial listener on mote #0 and was > able to see the receive raw output. I set it up like: > > PC ----- #0 -------------#1--------------------#2. > > I have some further question regarding the output: > > 00 FF FF 00 01 17 3F EE 00 01 00 0A 00 01 14 EE 00 01 00 14 00 00 00 0A CA > FE 00 00 00 00 00 > 00 FF FF 00 00 09 00 16 21 00 27 00 02 00 02 34 6A > 00 FF FF 00 01 17 3F EE 00 02 00 0A 00 02 27 EE 00 02 00 27 00 01 00 98 CA > FE 00 00 00 00 00 > 00 FF FF 00 00 17 00 EE 00 00 00 00 00 00 77 EE 00 00 19 77 00 00 00 00 CA > FE 00 00 00 00 00 > 00 FF FF 00 00 09 00 16 20 00 77 00 00 00 00 34 6B > 00 FF FF 00 00 09 00 16 50 00 00 00 00 00 00 34 6C > 00 FF FF 00 00 09 00 16 21 00 15 00 01 00 01 34 6D > 00 FF FF 00 01 17 3F EE 00 01 00 0A 00 01 15 EE 00 01 00 15 00 00 00 0A CA > FE 00 00 00 00 00 > 00 FF FF 00 00 09 00 16 21 00 28 00 02 00 02 34 6E > 00 FF FF 00 01 17 3F EE 00 02 00 0A 00 02 28 EE 00 02 00 28 00 01 00 98 CA > FE 00 00 00 00 00 > > According to the message type definition in TestNetwork.h using the > following example I can see: > > 00 02 00 28 00 01 00 98 CA FE 00 00 00 00 00 > > that 00 02 is the 2 byte node ID, 00 28 is the seq no., 00 01 is the parent > ID, 00 98 seems to be the metric, CA EF is the data. but the hop count is > always 0 for node #2. I can see it always set to 0 in the TestNetworkC.nc. > Isn't it supposed to be 1 or 2 in this topology? What about send count and > send success count?
hopcount, sendcount, sendsuccesscount are not used in the current TestNetwork. If you need to send additional information from each node to the base station, feel free to use these fields. - om_p _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
