Check whether you are getting a message *INFO: Starting to proxy for 0x1 when you run the routing driver. If you don't that means the node router is not associating with the edge router, Also you should see green light blinking in the edge router as soon as you power up the node.*
**Also Try searching in TinyOS mail archive<http://www.mail-archive.com/[email protected]/> . Sripada Kadambar IISc, Bangalore On Fri, Apr 23, 2010 at 5:50 AM, bouakkaz issam <[email protected]>wrote: > Hello All; > > I install tinyos-2.x and I am not sure if it is working good, I need to > test this two applications IPBaseStation and UDPEcho if they are working > well , the two applications are compiling well. > > In the tutorial of blip we can make : ping6 fec0::1 but this instruction > don't work I get test message "connect: Network is unreachable". > But when I ping on 64 it work : ping6 fec0::64 is binging. > > So what is the problem? when I install EDPEcho on the mote, I made : > > make iris blip install.1 mib520,/dev/ttyUSB0 , so normally I can ping on the > 1 address > > > Best Regards > issam > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
