Hi Guys, Ok, it will take a couple of days. We have extended the MicaBusC component to provide access to pins that the old one did not give, and also to give access to an interrupt. I want to review the whole setup to make sure that it works both on the MICA2 and IRIS motes (I have no MICAZ, but it should be identical to the IRIS).
Best, Miklos On Thu, May 13, 2010 at 10:24 PM, Miklos Maroti <[email protected]> wrote: > Hi Phil, > > Yes, I would be happy to do so. Some of the code is atmega128 specific > (I2C and ADC), but all of them are in HALs and use the latest > interfaces from the core atmega128 codebase. The rest is platform > independent. I think it is a good idea if more people will start to > use it. There is an issue with the ATM128_I2C_EXTERNAL_PULLDOWN macro, > which we have discussed with David Gay, which is independent of the > mts400, but will need to be resolved nonetheless. > > Miklos > > On Thu, May 13, 2010 at 10:10 PM, Philip Levis <[email protected]> wrote: >> >> On May 10, 2010, at 8:17 AM, Miklos Maroti wrote: >> >>> Hi Conny, >>> >>> Use this repository and the latest CVS version of tinyos-2.x. >>> Everything should work on the mts400 with this code. >>> >>> http://szte-wsn.cvs.sourceforge.net/viewvc/szte-wsn/tinyos/tos/lib/Mts400/ >> >> Miklos, >> >> Can you check this into the main TinyOS tree, or would you rather I do so? >> >> Phil >> > _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
