All:
I'm having an issue getting CTP to work with a TOSSIM simulation I'm
running. I've enabled some of the debugging in CTP and from what I can tell
everything is setting up properly. I get these messages from the sink:
DEBUG (1): clientPtrs[0] = 0x76a070
DEBUG (1): CtpRoutingEngineP$0$RootControl$setRoot I'm a root now!
DEBUG (1): CtpForwardingEngineP$0$sendTask$runTask: Trying to send a packet.
Queue size is 0.
DEBUG (1): CtpForwardingEngineP$0$sendTask$runTask: queue empty, don't
send
and a bit later
DEBUG (1): CtpRoutingEngineP$0$sendBeaconTask$runTask parent: 1 etx: 0
>From the other node I get
DEBUG (2): clientPtrs[0] = 0x76a080
DEBUG (2): CtpForwardingEngineP$0$Send$send: sending packet from client 0:
6a0e52, len 11
DEBUG (2): CtpForwardingEngineP$0$Send$send: queue entry for 0 is 0
deep
DEBUG (2): CtpForwardingEngineP$0$sendTask$runTask: Trying to send a packet.
Queue size is 1.
DEBUG (2): CtpForwardingEngineP$0$sendTask$runTask: no route, don't send,
start retry timer
DEBUG (2):
CtpRoutingEngineP$0$updateRouteTask$runTask
DEBUG (2): CtpRoutingEngineP$0$sendBeaconTask$runTask parent: 65535 etx:
0
DEBUG (2):
CtpRoutingEngineP$0$updateRouteTask$runTask
DEBUG (2):
CtpRoutingEngineP$0$updateRouteTask$runTask
DEBUG (2):
CtpRoutingEngineP$0$updateRouteTask$runTask
DEBUG (2):
CtpRoutingEngineP$0$updateRouteTask$runTask
DEBUG (2):
CtpRoutingEngineP$0$updateRouteTask$runTask
DEBUG (2):
CtpRoutingEngineP$0$updateRouteTask$runTask
DEBUG (2): CtpForwardingEngineP$0$sendTask$runTask: Trying to send a packet.
Queue size is 1.
DEBUG (2): CtpForwardingEngineP$0$sendTask$runTask: no route, don't send,
start retry timer
and then it sticks in a loop of the updateRouteTask and attempting to send
with the same errors. I setup my network connections as
r->add(1,2,-54.0);
r->add(2,1,-54.0);
Also, all commands I call in CTP return success but, obviously, the send
never completes. After turning on the radio I do this,
call RoutingControl.start();
if (isSink)
call RootControl.setRoot();
for setting up CTP. Does anyone have any ideas as to what might be going on
here? I'm at a loss for what I could be doing wrong.
thanks,
Newlyn
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
