Hi Omar, You should reduce the sampling rate considerably on the MicaZ. It works on IRIS motes where the radio stack does not disable the interrupts for more than 1-2 microseconds. No, there is no readme yet, maybe we will put together a technical report on it.
Miklos On Thu, May 27, 2010 at 1:47 PM, Omar Bouzid <[email protected]> wrote: > Hi Miklos, > > Is there any README file that explains how to use these applications?, cause > I have downloaded them on the MICAZ with mts300 sensor board and I haven't > got any error while executing make command, but I got no response even the > leds didn't blink. I am not sure if I should change any setting in the > Makefile. > > I appreciate any help I advance. > > Thanks, > Omar > >>-----Original Message----- >>From: [email protected] [mailto:[email protected]] On Behalf Of Miklos >>Maroti >>Sent: 27 May 2010 10:04 >>To: Omar Bouzid >>Cc: [email protected] >>Subject: Re: [Tinyos-help] ADC free run mode >> >>Hi Omar! >> >>Here: >> >>http://szte-wsn.cvs.sourceforge.net/viewvc/szte- >>wsn/tinyos/apps/MicReadStreamTest/ >> >>Miklos >> >>On Thu, May 27, 2010 at 10:48 AM, Omar Bouzid >><[email protected]> wrote: >>> Hi Miklos, >>> >>> Thanks a lot for your reply. I'll have a deep look on this library but >>I cannot find the MicReadStreamTest >>> Application that you have mentioned in this email. So, please let me >>know where I can find it. >>> >>> Best regards, >>> Omar >>> >>>>-----Original Message----- >>>>From: [email protected] [mailto:[email protected]] On Behalf Of Miklos >>>>Maroti >>>>Sent: 26 May 2010 21:58 >>>>To: Omar Bouzid >>>>Cc: [email protected] >>>>Subject: Re: [Tinyos-help] ADC free run mode >>>> >>>>Hi Omar, >>>> >>>>This library modifies the default ReadStream implementation on the >>>>atmega128 MCU to use in free running mode. >>>> >>>>http://szte-wsn.cvs.sourceforge.net/viewvc/szte- >>>>wsn/tinyos/tos/lib/Atm128FastAdc/ >>>> >>>>In the same repository you will see a sound recorder MicReadStreamTest >>>>application that uses this module to record sound at 17 khz and stream >>>>it to the base station (you will need a fast basestation). >>>> >>>>Best, >>>>Miklos >>>> >>>> >>>> >>>>On Wed, May 19, 2010 at 4:24 PM, Omar Bouzid >>>><[email protected]> wrote: >>>>> Hi all, >>>>> I want to know how can I use the ADC free run mode in tinyos-2.x >>using >>>>Micaz to sample continuously the mts310 microphone sensor? Or how can >>I >>>>modify DetectorC code in the soundlocalizer application so that it >>saves >>>>the data sampled in a buffer rather doing threshold test? >>>>> >>>>> Your help is highly appreciated. >>>>> >>>>> Thanks, >>>>> Omar >>>>> >>>>> _______________________________________________ >>>>> Tinyos-help mailing list >>>>> [email protected] >>>>> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos- >>>>help >>>>> >>> > _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
