Hi Brano, Yes, please. I am so sorry for the late reply.
thanks Yusnaidi On Thu, May 27, 2010 at 2:10 PM, Brano Kusy <[email protected]>wrote: > hi yusnaidi, > > unfortunately, tossim does not support simulation of local clock at the > moment. thus FTSP is not supported. > > if you'd like to add this support, i can help you out. > > brano > > > On 18/05/10 11:46 PM, "Yusnaidi Md Yusof" <[email protected]> wrote: > > > Hi Brano, > > > > Thanks very much. I got it. I can compile it now. However, when I issue a > > 'make micaz sim' command, I got error messages such as follows: > > > > ++++++++++++++++ > > In component `AppC': > > AppC.nc:33: no match > > make: *** [sim-exe] Error 1 > > ++++++++++++++++ > > > > This is what I have in the module file: > > > > uses interface PacketTimeStamp<TMilli,uint32_t> as PacketTimeStampMilli; > > > > > > and this is what I have in the configuration file: > > > > components ActiveMessageC; > > AppC.PacketTimeStampMilli -> ActiveMessageC; > > > > > > > > Am I missing something here? Is it the ActiveMessageC is the correct > > component to use to wire the PacketTimeStamp in order to get the > > transmission time for a packet? FYI, I am using the CTP and wishes to get > > the transmission time for each packet in CTP. > > > > I have also tried to wire the PacketTimeStamp using the CC2420PacketC > > component but got a very long error messages after issuing make micaz > > sim...I am so stucked what to do now... > > > > > > Please again help me... > > > > Thanks very much. > > > > > > Yusnaidi > > > > ------------------------------ > >> > >> Message: 2 > >> Date: Tue, 18 May 2010 10:53:11 +1000 > >> From: "Kusy, Brano" <[email protected]> > >> Subject: Re: [Tinyos-help] Packet transmission time > >> To: Yusnaidi Md Yusof <[email protected]>, > >> "[email protected]" > >> <[email protected]> > >> Message-ID: > >> <c8182217.d635%[email protected]<c8182217.d635%[email protected]> > <c8182217.d635%[email protected]<c8182217.d635%[email protected]> > > > >>> > >> Content-Type: text/plain; charset="US-ASCII" > >> > >>> Hi All, > >>> > >>> I need to get the time of packet transmission. I guess to use the > >>> PacketTimeStamp interface to get this time where I need to use the > >> timestamp > >>> method in the sendDone() and receive() method. Thus, I wire the > >>> PacketTimeStamp interface to the ActiveMessageC components such as > >> follows: > >>> > >>> In the module file: > >>> > >>> uses interface PacketTimeStamp<TMilli,uint32_t> as > PacketTimeStampMilli; > >>> > >>> In the configuration file: > >>> > >>> AppC.PacketTimeStampMilli -> ActiveMessageC; > >>> > >>> > >>> However, when I issued make micaz, I got the following errors: > >>> > >>> ------------------ > >>> In interface `PacketTimeStamp': > >>> /opt/tinyos-2.x/tos/interfaces/PacketTimeStamp.nc:38: syntax error > before > >>> `*' > >> include message.h in your module file... > >> > >> brano > >> > >> > >> > >> > > >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
