That's the ticket! I downloaded the FT_Prog utility from FTDI and was able to rename and serialize the devices very easily. Thanks for the tip!
MI On Thu, Jul 15, 2010 at 12:18 PM, Michael Schippling <[email protected]>wrote: > I think you have to program the USB chip separately > using software from FTDI or the chip's mfg. Look into > the interface chip's doc. > MS > > > Michael Ireland wrote: > >> Hello all - I have manufactured some TelosB motes and run into a problem: >> They do not identify correctly. They will program and operate correctly, but >> they identify as >> >> (none) /dev/ttyUSB0 FTDI USB <-> SERIAL >> >> My impression is that the 93c46 EEPROM needs to be written with the serial >> number and the device ID, and that this would need to be orchestrated via >> software on the MCU. Am I understanding the situation correctly? If so, is >> there an initialization program (or equivalent process) which can be run on >> a newly manufactured TelosB to accomplish this? >> >> Thank you for considering my troubles... >> >> Mike >> >> >> ------------------------------------------------------------------------ >> >> >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
