Dear Tinyos-help community, I have been trying to get the Imote2 to function with OscilloscopeRF, following this guide: http://www.cse.wustl.edu/wsn/index.php?title=Running_OscilloscopeRF_on_the_Imote2
Both programs have no problems when being made and loaded onto the imotes. The problem is the motes with OscilloscopeRF_Imote2 and TOSBase don't seem to communicate with each other (the leds are not blinking). The OscilloscopeRF mote blinks green once when reset, but does not continue. Nothing is being read on the SerialForwarder. I have reinstalled tinyos and cygwin 3 times on 2 different computers, following the installation instructions of both that specific site and others to no avail. Interestingly, other programs like CntToLedsAndRfm with TOSBase work fine. I am using tinyos 1.x. Any ideas as to what could be the problem and how I should go about solving it? Has anyone had success with using Oscilloscope with the Imote2? Thank you all very much, Arun
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
