Any ideas? I tried to connect the plus terminal of lab power supply to the plus terminal of multimeter, then I connect the minus terminal of multimeter to the VCC of Iris Mote (plus terminal of battery pack) and the GND of Iris Mote (minus terminal of battery pack) to the minus terminal of lab power supply. Finally I turned on the switch. The multimeter shows 8.5 mA, but I can not understand what is this value beacause the Iris Mote seems off; in fact when it send a message the red led is on, but all led, with this configuration, are off.
Someone can help me? Thanks. Francesco Ficarola ha scritto: > Hi everybody. > I have an Iris mote and I installed the TestLpl app. Now I'd like to > measure the current values for comparison with the manual provided by > Crossbow. I also have a multimeter. Where do I break the circuit to > insert the multimeter if battery pack is soldered on the mote? If you > can help, there is a switch "on/off". > > P.S. If I can not use the battery pack I also have a lab power supply > with 0-30V and 0-2A ranges. > > Greetings, -- Francesco Ficarola <francesco.ficarola_at_gmail_dot_com> Presidente LUG-PV (http://lugpv.netsons.org) Mailing List: lugpv_at_lists.linux_dot_it [GPG KeyID: 0xDBA99D92] http://lugpv.netsons.org/gpgkeys/francesco_ficarola.asc Il nuovo modo di fare ricerca: www.tradoogle.it
signature.asc
Description: OpenPGP digital signature
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
