It has...
*******************************
generic module SwitchToggleC() {
provides interface Get<bool>;
provides interface Notify<bool>;
uses interface GeneralIOUB1;
uses interface GpioInterruptUB1;
}
implementation {
...
Zsolt
On Tue, 2010-09-28 at 09:26 -0500, Janos Sallai wrote:
> Most probably, SwitchToggleC doesn't have interfaces called
> GeneralIOUB1 and GpioInterruptUB1.
>
> Janos
>
>
> On Tue, Sep 28, 2010 at 6:18 AM, Zsolt Varady <[email protected]> wrote:
> > Dear Janos,
> >
> > Thank you for the answer, the information about wiring directly to
> > HplAtm128GeneralIOC helped a lot. So I moved forward, but I am still
> > lost.
> >
> > Now I have:
> >
> > HplUserButtonC.nc
> > ******************************************
> > configuration HplUserButtonC {
> > provides interface GeneralIO as GeneralIOUB1;
> > provides interface GpioInterrupt as GpioInterruptUB1;
> > }
> > implementation {
> > components HplAtm128GeneralIOC as GeneralIOC;
> > components HplAtm128InterruptC as InterruptC;
> >
> > GeneralIOUB1 = GeneralIOC.PortD0;
> >
> > components new Atm128GpioInterruptC() as InterruptUserButton1C;
> > InterruptUserButton1C.Atm128Interrupt -> InterruptC.Int0;
> > GpioInterruptUB1 = InterruptUserButton1C.Interrupt;
> >
> > }
> > ******************************************
> >
> > UserButtonC.nc
> > ******************************************
> > #include <UserButton.h>
> >
> > configuration UserButtonC {
> > provides interface Get<button_state_t>;
> > provides interface Notify<button_state_t>;
> > }
> > implementation {
> > components HplUserButtonC;
> >
> > components new SwitchToggleC();
> > SwitchToggleC.GeneralIOUB1 -> HplUserButtonC.GeneralIOUB1; // line 55
> > SwitchToggleC.GpioInterruptUB1 -> HplUserButtonC.GpioInterruptUB1; //
> > line 56
> >
> > components UserButtonP;
> > Get = UserButtonP;
> > Notify = UserButtonP;
> >
> > UserButtonP.GetLower -> SwitchToggleC.Get;
> > UserButtonP.NotifyLower -> SwitchToggleC.Notify;
> > }
> > ******************************************
> >
> > when I am compiling I also get:
> >
> > In component `UserButtonC':
> > tos/platforms/plxincirc/UserButtonC.nc: At top level:
> > tos/platforms/plxincirc/UserButtonC.nc:54: no match
> > tos/platforms/plxincirc/UserButtonC.nc:55: no match
> >
> >
> > Can you (or somebody else) explain me what is wrong here? How can I use
> > the interface in UserButtonC.nc what HplUserButtonC.nc provides?
> >
> > Of course I tried to understand the documentation, check other codes,
> > but I need more practice in order the NesC system to become clear.
> >
> >
> > regards,
> > Zsolt
> >
> > On Mon, 2010-09-27 at 21:49 -0500, Janos Sallai wrote:
> >> Zsolt:
> >>
> >> If the user button is connected to any of the int0, int1, int2, or
> >> int3 pins (i.e. Port D0 to Port D3), you can wire against
> >> HplAtm128Interrupt. Note that HplAtm128Interrupt provides
> >> HplAtm128Interrupt interfaces. You will want to use
> >> Atm128GpioInterruptC to convert to the GpioInterrupt interface.
> >>
> >> You don't want to use Msp430GpioC, because that's for a completely
> >> different MCU.
> >>
> >> From the error message you quote, I notice that you have a couple of
> >> syntax errors in the top-level code. Also, your HplUserButtonC.nc
> >> looks good, but you'll need to double check the component names (i.e.
> >> there's no such thing as Atm128GpioC). The GeneralIO interface is
> >> provided by HplAtm128GeneralIOC , you can wire that directly to the
> >> GeneralIO interface HplUserButtonC provides.
> >>
> >> Janos
> >>
> >>
> >> On Mon, Sep 27, 2010 at 2:36 PM, Zsolt Varady <[email protected]> wrote:
> >> > Dear List,
> >> >
> >> > I have a node with Atmel1281 MCU, I already have some working tinyOS
> >> > apps on it. Now I would like to implement a button, so I used
> >> > apps/tests/telosb/TestUserButton as a base.
> >> >
> >> > I copied the related files from app dir and from the telosb platform
> >> > directory as well (UserButtonP.nc, UserButton.h, UserButtonC.nc,
> >> > SwitchToggleC.nc, HplUserButtonC.nc), and even the Msp430GpioC.nc file
> >> > from chips/Msp430/pins, as it "kind of missing" in the Atmel dir.
> >> >
> >> > I tried to modify all of them to pass the Atmel MCU, but I guess I am
> >> > still missing something as I get the following error:
> >> >
> >> > In file included from ButtonsAppC.nc:15:
> >> > In component `ButtonsC':
> >> > ButtonsC.nc:48: syntax error before `button_state_t'
> >> > In file included from ButtonsAppC.nc:15:
> >> > ButtonsC.nc:49: syntax error before `button_state_t'
> >> > ButtonsC.nc:101: syntax error before `state'
> >> > ButtonsC.nc:101: unknown interface `Notify'
> >> > ButtonsC.nc: In function `Notify.notify':
> >> > ButtonsC.nc:102: `state' undeclared (first use in this function)
> >> > ButtonsC.nc:102: (Each undeclared identifier is reported only once
> >> > ButtonsC.nc:102: for each function it appears in.)
> >> > ButtonsC.nc:102: `BUTTON_PRESSED' undeclared (first use in this
> >> > function)
> >> > ButtonsC.nc:104: `BUTTON_RELEASED' undeclared (first use in this
> >> > function)
> >> > ButtonsC.nc: In function `Timer.fired':
> >> > ButtonsC.nc:110: `button_state_t' undeclared (first use in this
> >> > function)
> >> > ButtonsC.nc:110: syntax error before `bs'
> >> > ButtonsC.nc:112: `bs' undeclared (first use in this function)
> >> > ButtonsC.nc:112: `Get' undeclared (first use in this function)
> >> > ButtonsC.nc:113: `BUTTON_PRESSED' undeclared (first use in this
> >> > function)
> >> > ButtonsC.nc:115: `BUTTON_RELEASED' undeclared (first use in this
> >> > function)
> >> > In component `HplUserButtonC':
> >> > tos/platforms/plxincirc/HplUserButtonC.nc: At top level:
> >> > tos/platforms/plxincirc/HplUserButtonC.nc:48: no match
> >> > In component `ButtonsAppC':
> >> > ButtonsAppC.nc:41: cannot find `Get'
> >> > ButtonsAppC.nc:42: cannot find `Notify'
> >> > make: *** [exe0] Error 1
> >> >
> >> >
> >> > I am quite new to tinyOS, so I am just guessing, that the problem is in
> >> > the Hpl file:
> >> >
> >> > ********************************
> >> > configuration HplUserButtonC {
> >> > provides interface GeneralIO;
> >> > provides interface GpioInterrupt;
> >> > }
> >> > implementation {
> >> > components HplAtm128GeneralIOC as GeneralIOC;
> >> > components HplAtm128InterruptC as InterruptC;
> >> >
> >> > components new Atm128GpioC() as UserButtonC;
> >> > UserButtonC -> GeneralIOC.PortD0; // line 48
> >> > GeneralIO = UserButtonC;
> >> >
> >> > components new Atm128GpioInterruptC() as InterruptUserButtonC;
> >> > InterruptUserButtonC.Atm128Interrupt -> InterruptC.Int0;
> >> > GpioInterrupt = InterruptUserButtonC.Interrupt;
> >> > }
> >> > ********************************
> >> >
> >> > or in Atm128GpioC:
> >> >
> >> > ********************************
> >> > generic module Atm128GpioC() @safe() {
> >> > provides interface GeneralIO;
> >> > uses interface HplAtm128GeneralIO as HplGeneralIO;
> >> > }
> >> > implementation {
> >> >
> >> > async command void GeneralIO.set() { call HplGeneralIO.set(); }
> >> > async command void GeneralIO.clr() { call HplGeneralIO.clr(); }
> >> > async command void GeneralIO.toggle() { call HplGeneralIO.toggle(); }
> >> > async command bool GeneralIO.get() { return call HplGeneralIO.get(); }
> >> > async command void GeneralIO.makeInput() { call
> >> > HplGeneralIO.makeInput(); }
> >> > async command bool GeneralIO.isInput() { return call
> >> > HplGeneralIO.isInput(); }
> >> > async command void GeneralIO.makeOutput() { call
> >> > HplGeneralIO.makeOutput(); }
> >> > async command bool GeneralIO.isOutput() { return call
> >> > HplGeneralIO.isOutput(); }
> >> >
> >> > }
> >> > ********************************
> >> >
> >> >
> >> > Any help, suggestion would be very nice.
> >> > Thanks in advance.
> >> >
> >> > All the best,
> >> > Zsolt
> >> >
> >> > _______________________________________________
> >> > Tinyos-help mailing list
> >> > [email protected]
> >> > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
> >> >
> >
> > --
> > Plexipi Prototyping GmbH
> > Türrschmidtstraße 22
> > D-10317 Berlin
> > Tel.: +49-(0)30-577-99662
> > [email protected]
> > www.plexipi.com
> >
> > Registergericht: Amtsgericht Charlottenburg
> > Handelsregisternummer: HRB 111472
> > USt-IdNr.: DE 258431695
> >
> >
> >
--
Plexipi Prototyping GmbH
Türrschmidtstraße 22
D-10317 Berlin
Tel.: +49-(0)30-577-99662
[email protected]
www.plexipi.com
Registergericht: Amtsgericht Charlottenburg
Handelsregisternummer: HRB 111472
USt-IdNr.: DE 258431695
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
