Hello, I'm using tinyos-2.1.1, blip stack (2.0) and default LowPowerListening.
I've about 60 motes (TelosB and IRIS) deployed around a 2 floors building and some of them are 5 hops from the IPBaseStation. Not all of my motes are running on battery and those who are plugged on electric socket might be better routers from a power consumption point of view so I'm wondering if there is any way to change metrics forcing one mote to hop on "particular" motes. From the ip-driver shell, I've set one mote as "controller" but this modification doesn't seems to change routes or routing behavior encouraging motes to use the controller as first hop. am I doing it wrong? I'm also wondering if I can have more than one sink on the same network in order to collect data generated by sensors in more than one point. As far as I know is not possible to have two ip-driver running or one ip-driver managing two IPBaseStation on the same network. Is it right? Thanks in advance for any answer or suggestion Davide Pusceddu NIMBUS - Networked Embedded Systems Research Centre Cork Institute of Technology Rossa Avenue, Bishopstown Cork, Ireland _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
