Hello ... No, I could not use I2CPacket and found no code guide. what you could do is implement the code for I2C from HPL. Good luck ...
2010/10/8 You Lizhao <[email protected]> > Hi, sorry if it bothers you. I find your email from TinyOS-Maillist, and i > have encountered the same problem with you, that is i can not figure out how > to use I2CPacket interface. > > Currently, i use Telosb, and MMA7455 Acceleration Sensor. Moreever, we > extend telosb with I2C interface. However, i can not found useful code to > drive the acceleratio sensor. So if you got your problem solved in > TinyOS, would you mind sending me a copy of your code to show how to use I2C > interface? Thank you very much! > > Regards, > Lizhao > > 2010/5/18 Ronald Eliseo Reyes López <[email protected]> > >> >> ---------- Forwarded message ---------- >> From: Philip Levis <[email protected]> >> Date: 2010/5/17 >> Subject: Re: Help with I2CPacket.nc >> To: Ronald Eliseo Reyes López <[email protected]> >> Cc: [email protected], [email protected] >> >> >> Please send questions to tinyos-help. Thanks! >> >> Phil >> >> On May 16, 2010, at 5:21 PM, Ronald Eliseo Reyes López wrote: >> >> > Hi. >> > >> > I'm a student and I need to control an pressure sensor, exactly BMP085 >> from Bosch Sensortec, for my tesis degree. >> > This sensor use I2C protocol to communicate with master, which will be a >> Telosb mote. >> > >> > The problem is I don't understand how to use the i2c_flags with the >> I2CPAcket's command read. The explanation is not enouhg seem me, please >> anybody can help me? >> > >> > I have the new version of tinyos-2.x from cvs repository. >> > >> > thanks in advance, and i hope your answer. >> > >> > Ronald Reyes >> >> >> >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> > >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
