Hi, Failed to enter programming mode means that the programming software did not properly detect the mote or the mote did not properly answer. There are two common issues: mote not properly plugged in, and wrong serial port used.
Make sure the mote is properly plugged in over the whole length of the connector. When looking from the side, there should only be a thin line between the two connectors and no visible gap. If necessary, press mote and programming board right at the connector together at the beginning, the end and the middle of the connector. The mib520 has two serial ports. Usually, the port with the lower port number is the programming port (the other one is used for communicating with the software running on the mote). If in doubt, try both ports. Cheers, Urs On 10/12/2010 12:38 AM, Daniel Schnit wrote: > i forgot, i use mib520 and micaz > > On Mon, Oct 11, 2010 at 7:37 PM, Daniel Schnit <[email protected] > <mailto:[email protected]>> wrote: > > Hi all, > > i'm tried to install the blink app but failed, can anyone help me? > > when i tried this msg appear: > > "Failed to enter programming mode." > > If anyone know, help me please! > > Thanks _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
