Hi,

>From my experience with deluge, if you opt for 'disseminate and reboot'
option, the program gets disseminated and all the nodes now reboot with
this code in the current working direc



>
> Hi,
>
> I am using TinyOS 2.1 from the CVS. I have a problem with the Deluge
> reprogramming system.
>
> I have Deluge working OK, with a basestation and a number of nodes. The
> code correctly disseminates around the network, and appears to flash to
> the nodes as indicated by the fast flashing Leds.
>
> However, once this process is complete, the Leds fade down and then the
> node needs to be reset before it will run the program. If I reset the node
> manually, it will however successfully load the program...
>
> At first I wondered if this was a result of the reboot mechanism built
> into Deluge that sets up the watchdog timer of the MSP430 in order to
> force a reset. But when I tested this mechanism in my own code (which uses
> the same Deluge boot program, but obviously no change to the program at
> the reboot), the reset is successful.
>
> Is anybody aware of a reason for this?
>
> Do I need to consider an alternative reboot mechanism in the
> netprog_reboot() function? Or is this function not being called at all?
> (i.e. the reprogramming is occurring outside of the bootloader and no
> reboot even occurred to begin with.)
>
> Or is this a problem with the bootloader itself, in that it reprograms OK
> but is then unable to load the new program?
>
>
> Any help would be appreciated, otherwise I face another 10 hours of
> walking around manually resetting nodes...
>
>
>
> --
> This message has been scanned for viruses and
> dangerous content by MailScanner, and is
> believed to be clean.
>
> _______________________________________________
> Tinyos-help mailing list
> [email protected]
> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help


--Deeksha

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help

Reply via email to