Hi I am using Tinyos 2.1.1 , ubuntu 10.04 and two telosb motes ( TPR 2400/2420 ). I am following the tutorial for BLIP but I am unable to ping6 with the node running UDPEcho. If fec0::1 is pinged , there is no reply but it does seem to exist as otherwise it will give the error message "Network is unreachable". If anyone with BLIP experience can help out , much appreciated.
Regards Faisal Kingston University London. IP Driver a...@asus:/opt/tinyos-2.1.1/support/sdk/c/blip$ sudo driver/ip-driver /dev/ttyUSB0 telosb 2010-10-24T11:13:37.966GMT: INFO: Read config from 'serial_tun.conf' 2010-10-24T11:13:37.966GMT: INFO: Using channel 15 2010-10-24T11:13:37.966GMT: INFO: Retries: 5 2010-10-24T11:13:37.967GMT: INFO: telnet console server running on port 6106 2010-10-24T11:13:37.969GMT: INFO: created tun device: tun0 2010-10-24T11:13:38.240GMT: INFO: interface device successfully initialized 2010-10-24T11:13:38.240GMT: INFO: starting radvd on device tun0 2010-10-24T11:13:40.700GMT: INFO: Starting to proxy for 0x1 Serial Forwarder the sf in sdk/c had an error a...@asus:/opt/tinyos-2.1.1/support/sdk/c/sf$ ./bootstrap mkdir: cannot create directory `config-aux': File exists so i started the sf in sdk/cpp/sf/ a...@asus:/opt/tinyos-2.1.1/support/sdk/cpp/sf$ ./sf >> Starting sf-control. >> Accepting commands on standard input... start 9002 /dev/ttyUSB0 115200 >> Trying to start sf-server with id = 1 ( port = 9002 , device = /dev/ttyUSB0 , baudrate = 115200 ) serial deqeue packet, empty: 1 Pinging the IPbasestation works fine. a...@asus:/opt/tinyos-2.1.1/support/sdk/c/blip$ ping6 fec0::64 PING fec0::64(fec0::64) 56 data bytes 64 bytes from fec0::64: icmp_seq=1 ttl=64 time=0.047 ms 64 bytes from fec0::64: icmp_seq=2 ttl=64 time=0.056 ms 64 bytes from fec0::64: icmp_seq=3 ttl=64 time=0.056 ms 64 bytes from fec0::64: icmp_seq=4 ttl=64 time=0.062 ms 64 bytes from fec0::64: icmp_seq=5 ttl=64 time=0.057 ms 64 bytes from fec0::64: icmp_seq=6 ttl=64 time=0.077 ms ^C --- fec0::64 ping statistics --- 6 packets transmitted, 6 received, 0% packet loss, time 4996ms rtt min/avg/max/mdev = 0.047/0.059/0.077/0.010 ms Pinging UDPecho node fec0::1 a...@asus:/opt/tinyos-2.1.1/support/sdk/c/blip$ ping6 fec0::2 connect: Network is unreachable a...@asus:/opt/tinyos-2.1.1/support/sdk/c/blip$ ping6 fec0::1 PING fec0::1(fec0::1) 56 data bytes ^C --- fec0::1 ping statistics --- 20 packets transmitted, 0 received, 100% packet loss, time 19143ms Router console a...@asus:/opt/tinyos-2.1.1/support/sdk/c/blip$ telnet localhost 6106 Trying ::1... Connected to localhost. Escape character is '^]'. Welcome to the blip console! blip:asus> links 0x1[P]: dist: 1.0 reported: 2010-10-24T11:13:40.700GMT --> 0x64 [1.0] 0x64[C]: dist: 0.0 blip:asus> routes 0x1: 0x64 0x64: blip:asus>
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
