Hi Francesco, I'm out of ideas. You can find the schematics of the sensor board in the MTS/MDA Sensor Board User's Manual: http://ru1.cti.gr/projects/webdust/export/285/doc/info/MTS-MDA_Series_Users_Manual.pdf
Maybe it's a hardware problem? Have you tried with a different sensor board and a different mote? What happens if instead of turning the sensors manually off, you turn them manually on? Does this increase the power consumption? Cheers, Urs On 10/25/10 5:39 PM, Francesco Ficarola wrote: > Hi Urs, > thanks a lot for your help. I tried to deactive all integrated sensors > in my MDA300CA sensorboard with MicaBusC component; I used "clr()" in > Int0 - Int3 and PW0 - PW7, but the current is always about 5 mA. I would > like to disconnect the power to the sensorboard, but is it not possible, > right? > My app reads ADC values by the sensorboard each three seconds, but my > sensorboard consumes always 5 mA. In this case the battery life is too > short. :( Does it exist another way to deactive the current? > > Thanks again for your time. > > Greetings, _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
