Do you have Tmote Invents? If so, you need the Tmote Invent drivers.
How to identify whether the motes you have are Tmote Invents? From
memory, this is what I remember: They have a light sensor, a microphone,
a (small) loudspeaker, headphone jacks, and an accelerometer. They come
(came) in a gray plastic casing that could be attached to a key chain
and have two buttons: power and reset. They have a rechargeable battery
that is powered over USB. Internally, they are Tmote Skys with an
extension board.
Cheers,
Urs
On 11/18/10 6:21 PM, CJ Davies wrote:
> Is there any reference documentation for the tmote sky from moteiv, in
> particular which actually lists how each sensor/LED is accessed? The
> models I have here have a daughter board that sits on top of the main
> board& has 3 LEDs on it which line up with 3 holes in the plastic
> casing - however if I use LedsC& Leds.led{0-2}toggle() this activates
> the LEDs on the main board, not the daughter board - this is a bit
> annoying because the LEDs on the main board are obscured by the casing
> so can only be seen when it is dismantled!
>
> Regards,
> CJ Davies
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
