Hi Janos, Thanks for the information. I've checked out the new code from the trunk. Looks like there is a new module "rfxlink" for radio interface. Will it be standard to integrate radio driver with this module for further implementation? Should I move to this baseline? What's your opinion? (to Thomas, too)
Thanks a lot. Best regards, Jimmy On Wed, Nov 24, 2010 at 8:31 PM, Janos Sallai <[email protected]>wrote: > Jimmy, > > I committed the cc2420x driver to the main tree. Since Thomas's cc2520 > implementation should be very similar, you can just take a look at the > wirings in chips/cc2420x and in platforms/micaz/chips/cc2420x and use > them as a reference. > > Janos > > On Wed, Nov 24, 2010 at 9:39 AM, Chih-Ming Hsieh > <[email protected]> wrote: > > Hi Thomas, > > > > I am currently trying to integrate the cc2520 driver to cc2520dk > platform, > > however I encountered some problems. I was wondering if I could have some > > advices from you. Thank you in advance. > > > > Currently, I take the reference from the platform setting from > sam3u_ek2520 > > and wire cc2520 driver to MSP430X. However, when I tried to compile, I > > couldn't find a couple of components. Then I tried to use rf2xx_new chip > and > > this looked better but I still got some errors (until now) due to some > > interface changes (e.g. DummyLayerC.RadioState). So I am thinking that > maybe > > I've got wrong settings and it's better to consult with you about the > > correct combination. > > > > If possible, could you please tell me what are the correct modules which > I > > should include to make the driver working? Thank you very much. > > > > Best regards, > > Jimmy > > > > On Thu, Sep 30, 2010 at 11:01 AM, Chih-Ming Hsieh < > [email protected]> > > wrote: > >> > >> Hi Thomas and Janos, > >> > >> > >> Great! Thanks a lot for the information. I am going to try it on my > >> cc2520DK. Really appreciate your efforts. > >> > >> Also thanks to Miklos. > >> > >> Best regards, > >> Jimmy > >> > >>> > >>> On 09/23/2010 04:49 PM, Thomas Schmid wrote: > >>>> > >>>> Yes, we have a cc2520 driver. But it is not in contrib nor main yet > >>>> (though hopefully soon). You can find it here: > >>>> > >>>> http://github.com/tschmid/tinyos-2.x > >>>> > >>>> in tos/chips/cc2520 > >>>> > >>>> > >>>> - Thomas > >>> > >>> > >>> On 09/23/2010 04:49 PM, Thomas Schmid wrote: > >>>> > >>>> Yes, we have a cc2520 driver. But it is not in contrib nor main yet > >>>> (though hopefully soon). You can find it here: > >>>> > >>>> http://github.com/tschmid/tinyos-2.x > >>>> > >>>> in tos/chips/cc2520 > >>>> > >>>> > >>>> - Thomas > >>>> > >>>> -- > >>>> Post Doctoral Researcher > >>>> University of Michigan, Ann Arbor > >>>> > >>>> "The most renewable energy we have is our own potential, and our own > >>>> passion." - Bertrand Piccard > >>>> > >>>> > >>>> > >>>> On Thu, Sep 23, 2010 at 10:28 AM, Janos Sallai > >>>> <[email protected]> wrote: > >>>>> > >>>>> Jimmy, > >>>>> If I remember correctly, Thomas Schmid wrote a cc2520 stack based on > my > >>>>> cc2420 code. I suggest that you check with him whether the code is > >>>>> publicly > >>>>> available. > >>>>> Janos > >>>>> On Sep 23, 2010 3:43 AM, "Chih-Ming Hsieh"<[email protected]> > >>>>> wrote: > >>>>>> > >>>>>> Hi Miklos, > >>>>>> > >>>>>> Thank you very much for the information. I'll take a look at this > >>>>>> module > >>>>>> as > >>>>>> well as CC2420 port then come back when I get concrete questions. > >>>>>> > >>>>>> Thanks again and best regards, > >>>>>> Jimmy > >>>>>> > >>>>>> On Wed, Sep 22, 2010 at 2:57 PM, Miklos Maroti > >>>>>> <[email protected]>wrote: > >>>>>> > >>>>>>> Hi Jimmy, > >>>>>>> > >>>>>>> I do not know of an exact port. There is a cc2420 radio stack > written > >>>>>>> by Janos Sallai (tinyos-2.x-contrib/vu/tos/chips/cc2420x) that > could > >>>>>>> be quite easy to port to the cc2520, but that requires some effort. > I > >>>>>>> would be happy to help with that and give hints, but I have no > access > >>>>>>> to a cc2520 based mote. The other option would be to port the > >>>>>>> original > >>>>>>> cc2420 code. > >>>>>>> > >>>>>>> Best, > >>>>>>> Miklos > >>>>>>> > >>>>>>> On Wed, Sep 22, 2010 at 11:38 AM, Chih-Ming Hsieh > >>>>>>> <[email protected]> wrote: > >>>>>>>> > >>>>>>>> Hi Miklos, > >>>>>>>> > >>>>>>>> Thank you very much for the reply. It's good to know that there > >>>>>>>> might > >>>>>>>> be > >>>>>>>> some efforts done before I jump into this. Yes, I am referring to > >>>>>>>> the > >>>>>>>> CC2520+MSP430 support. As you suggested I looked up in the > >>>>>>>> tinyos-2.x-contrib module and did find a port for CC2500 from > "David > >>>>>>> > >>>>>>> Moss, > >>>>>>>> > >>>>>>>> et al." It's a step closer but I suspect there will still be some > >>>>>>>> work > >>>>>>>> to > >>>>>>>> make it running on CC2520 development kit. Therefore I would like > to > >>>>>>>> ask > >>>>>>> > >>>>>>> you > >>>>>>>> > >>>>>>>> whether you know an exact port for CC2520. Any hints would be > >>>>>>> > >>>>>>> appreciated, > >>>>>>>> > >>>>>>>> since I had no luck with "tinyos cc2520" combination on Google > >>>>>>>> search. > >>>>>>> > >>>>>>> :-( > >>>>>>>> > >>>>>>>> Thank you very much. > >>>>>>>> > >>>>>>>> Best regards, > >>>>>>>> Jimmy > >>>>>>>> > >>>>>>>> On Tue, Sep 21, 2010 at 9:15 PM, Miklos Maroti > >>>>>>>> <[email protected] > >>>>>>>> > >>>>>>>> wrote: > >>>>>>>>> > >>>>>>>>> Hi Jimmy, > >>>>>>>>> > >>>>>>>>> Are you referring to the support of the CC2520 radio chip and/or > >>>>>>>>> for > >>>>>>>>> the support of the CC2520 development kit? If I know correctly, > >>>>>>>>> then > >>>>>>>>> there are efforts (or might have already been done) to port the > >>>>>>>>> cc2420 > >>>>>>>>> code to cc2520. > >>>>>>>>> > >>>>>>>>> Miklos > >>>>>>>>> > >>>>>>>>> On Tue, Sep 21, 2010 at 3:24 PM, Chih-Ming Hsieh > >>>>>>>>> <[email protected]> wrote: > >>>>>>>>>> > >>>>>>>>>> Dear All, > >>>>>>>>>> > >>>>>>>>>> I am planning to work on TinyOS and CC2520DK for my research > >>>>>>>>>> project > >>>>>>>>>> therefore I would need a CC2520DK port. Since I couldn't find > >>>>>>>>>> there > >>>>>>> > >>>>>>> are > >>>>>>>>>> > >>>>>>>>>> existing contributions, I would like to confirm you guys that > >>>>>>>>>> there > >>>>>>>>>> is > >>>>>>>>>> and > >>>>>>>>>> will be no TinyOS ported on CC2520DK released in the short > future > >>>>>>>>>> to > >>>>>>>>>> avoid > >>>>>>>>>> redundant efforts. If there are no efforts on this task, I would > >>>>>>>>>> like > >>>>>>> > >>>>>>> to > >>>>>>>>>> > >>>>>>>>>> work on it. > >>>>>>>>>> > >>>>>>>>>> Hope someone can give me some advices. Thanks in advance. > >>>>>>>>>> > >>>>>>>>>> Best regards, > >>>>>>>>>> Jimmy > >>>>>>>>>> > >>>>>>>>>> _______________________________________________ > >>>>>>>>>> Tinyos-devel mailing list > >>>>>>>>>> [email protected] > >>>>>>>>>> > >>>>>>>>>> > >>>>>>> > >>>>>>> > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-devel > >>>>>>>>>> > >>>>>>>> > >>>>> _______________________________________________ > >>>>> Tinyos-help mailing list > >>>>> [email protected] > >>>>> > >>>>> > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > >>>>> > >> > > > > > > _______________________________________________ > > Tinyos-help mailing list > > [email protected] > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help > > >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
