I'm working on Deluge T2 since a few days ago... and I don't understand it at all ... Have you tested the "burn" script included in "apps\tests\deluge\Blink" ? You can open it and see the different steps.
Regards, Jose A. ----- Mensaje original ----- De: Devasenapathy <[email protected]> Fecha: Jueves, Diciembre 30, 2010 8:59 ombr Asunto: [Tinyos-help] Deluge on new platform A: [email protected] > > > Hello All > > I have an exact replica of a tmote-sky on which I need to > use deluge. > > I have the following issue with this: > > I followed the instructions in the Deluge T2 page: > http://docs.tinyos.net/index.php/Deluge_T2 as is and see that > the expected response is seen on tmotes. So I know that my > toolchain and environment are correct. However, I do not see > this on the tmote replica. > > A "make telosb install.1" in $TOSROOT/apps/tests/deluge/Blink > executes without errors, the startupsequence leds glow as > expected, but the periodic LED blink after this is not seen. > I tried fusing the code for a basestation with CFLAGS=- > DDELUGE_BASESTATION to see if there is a response to the tos- > deluge ping command. The response is: > > Flushing the serial port.. > Checking if node is a Deluge T2 base station ... > ERROR: Timeout. Is the node a Deluge T2 base station? > > I) I tried splitting the commands that follow as a result of the > make telosb reinstall command : > > tos-set-symbols --objcopy msp430-objcopy --objdump msp430- > objdump --target ihex build/telosb/main.ihex > build/telosb/main.ihex.out-1 TOS_NODE_ID=1 > ActiveMessageAddressC__addr=1 > tos-bsl --telosb -c /dev/ttyUSB0 -r -e -I -p /opt/tinyos- > 2.1.1/tos/lib/tosboot/build/telosb/main.ihex > tos-bsl --telosb -c /dev/ttyUSB0 -r -I -p > build/telosb/main.ihex.out-1 > > But this time included option --force-BSL-download into 1)the > first tos-bsl commands 2) the second one and 3) both commands. > There was no change in operation. > > II) I tried the second tos-bsl command with the -e option that > does a mass erase before reprogramming the mote. With this I see > the periodic blink. With the basestation cflags, my mote can > work perfectly as a basestation and can program tmotes over the > air. As a non-basestation mote, I see the indication that a page > has been received (second led blinks when the page is received) > but the switch between images does not happen. This is obvious > because the bootloader has been erased . > > III) I tried the tos-bsl commands with a -D option and see that > the bootloader and the blink application get loaded at different > memory locations. > > I have come to the conclusion that the bootloader and the blink > application get fused onto the mote at different memory > locations but cannot work together. > > Can anyone help me with this ? > > Any help would be appreciated. > Thanks, > Devasenapathy > > ╔══════════════════════════════════════╗ ║ José A. Tarifa Galisteo ║ ║ Estudiante Ingeniería de Telecomunicación ║ Escuela Superior de Ingenieros - U. Sevilla ║ http://alumno.us.es/j/jostargal/ ╚══════════════════════════════════════╝
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
