Hi,
when flashing one of our imote2, it does not go beyond "erasing
flash". However, when connecting through openocd the hardware is
properly recognized (see below). Any idea what could I try?
openocd -f interface/olimex-arm-usb-tiny-h.cfg -f board/crossbow_tech_imote2.cfg
Open On-Chip Debugger 0.4.0 (2010-12-16-12:05)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
15000 kHz
jtag_nsrst_delay: 260
jtag_ntrst_delay: 250
Info : imote2.cpu: hardware has 2 breakpoints and 2 watchpoints
jtag_nsrst_delay: 800
trst_and_srst separate srst_gates_jtag trst_push_pull srst_open_drain
Info : device: 6 "2232H"
Info : deviceID: 364511274
Info : SerialNumber: OLSLY9J? A
Info : Description: Olimex OpenOCD JTAG ARM-USB-TINY-H A
Info : max TCK change to: 30000 kHz
Info : clock speed 15000 kHz
Info : JTAG tap: imote2.cpu tap/device found: 0x79265013 (mfg: 0x009,
part: 0x9265, ver: 0x7)
Thanks!!!
Sergio
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
