And blip folder is the only one not recognized? I compiled other examples successfully…
De: PIETRO GONIZZI [mailto:[email protected]] Enviada: sexta-feira, 14 de Janeiro de 2011 17:40 Para: Carlos Rodrigues Assunto: Re: [Tinyos-help] 6lowpan/blip installation error Hi Carlos, it seems the blip folder is not recognized. Check that your tos environment is set correctly and that you are using tinyos-2.x Try typing tos2 from your console, then compile it again pietro 2011/1/14 Carlos Rodrigues <[email protected]> Hi, I'm starting working in a project about sensor networks and when I try compile IPBaseStation (last version in cvs) on iris, the compilation fails with the error below. It is possible someone give some "lights" about how to solve this problem? root@ubuntu:/home/carlos/IPBaseStation# make iris blib install mib510,/dev/ttyUSB0 mkdir -p build/iris compiling BaseStationC to a iris binary ncc -o build/iris/main.exe -Os -fnesc-separator=__ -Wall -Wshadow -Wnesc-all -target=iris -fnesc-cfile=build/iris/app.c -board=micasb -DDEFINED_TOS_AM_GROUP=0x22 --param max-inline-insns-single=100000 -DNO_IP_MALLOC -DIEEE154FRAMES_ENABLED -DIDENT_APPNAME=\"BaseStationC\" -DIDENT_USERNAME=\"root\" -DIDENT_HOSTNAME=\"ubuntu\" -DIDENT_USERHASH=0xa3473ba6L -DIDENT_TIMESTAMP=0x4d3059cbL -DIDENT_UIDHASH=0x5e9a1276L -fnesc-dump=wiring -fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs, components)' -fnesc-dumpfile=build/iris/wiring-check.xml BaseStationC.nc -lm BaseStationP.nc:93:21: error: devconf.h: No such file or directory BaseStationP.nc:94:24: error: lib6lowpan.h: No such file or directory In file included from BaseStationC.nc:81: In component `BaseStationP': BaseStationP.nc:112: interface IPAddress not found In file included from BaseStationC.nc:81: BaseStationP.nc:139: `BLIP_L2_RETRIES' undeclared here (not in a function) BaseStationP.nc:140: `BLIP_L2_DELAY' undeclared here (not in a function) BaseStationP.nc:149: syntax error before `*' BaseStationP.nc: In function `configureReply.runTask': BaseStationP.nc:180: `reply' undeclared (first use in this function) BaseStationP.nc:180: (Each undeclared identifier is reported only once BaseStationP.nc:180: for each function it appears in.) BaseStationP.nc:180: interface has no command or event named `getShortAddr' BaseStationP.nc: In function `Boot.booted': BaseStationP.nc:218: `reply' undeclared (first use in this function) BaseStationP.nc:218: `config_reply_t' undeclared (first use in this function) BaseStationP.nc:218: syntax error before `)' BaseStationP.nc: In function `SerialControl.startDone': BaseStationP.nc:237: `reply' undeclared (first use in this function) BaseStationP.nc:237: `CONFIG_ERROR_BOOTED' undeclared (first use in this function) BaseStationP.nc: In function `ConfigureReceive.receive': BaseStationP.nc:424: `config_cmd_t' undeclared (first use in this function) BaseStationP.nc:424: `cmd' undeclared (first use in this function) BaseStationP.nc:425: syntax error before `error' BaseStationP.nc:433: syntax error before `)' BaseStationP.nc:436: `CONFIG_ECHO' undeclared (first use in this function) BaseStationP.nc:436: case label does not reduce to an integer constant BaseStationP.nc:438: `CONFIG_SET_PARM' undeclared (first use in this function) BaseStationP.nc:438: case label does not reduce to an integer constant BaseStationP.nc:442: interface has no command or event named `setShortAddr' BaseStationP.nc:452: `CONFIG_REBOOT' undeclared (first use in this function) BaseStationP.nc:452: case label does not reduce to an integer constant BaseStationP.nc:455: `CONFIG_KEEPALIVE' undeclared (first use in this function) BaseStationP.nc:455: case label does not reduce to an integer constant BaseStationP.nc:459: `reply' undeclared (first use in this function) BaseStationP.nc:459: `error' undeclared (first use in this function) BaseStationP.nc: In function `ConfigureTimer.fired': BaseStationP.nc:478: `config_reply_t' undeclared (first use in this function) In file included from /opt/tinyos-2.1.1/tos/lib/serial/Serial802_15_4C.nc:43, from BaseStationC.nc:83: In component `SerialPacketInfo802_15_4P': /opt/tinyos-2.1.1/tos/lib/serial/SerialPacketInfo802_15_4P.nc: In function `Info.offset': /opt/tinyos-2.1.1/tos/lib/serial/SerialPacketInfo802_15_4P.nc:38: `cc2420_header_t' undeclared (first use in this function) /opt/tinyos-2.1.1/tos/lib/serial/SerialPacketInfo802_15_4P.nc: In function `Info.dataLinkLength': /opt/tinyos-2.1.1/tos/lib/serial/SerialPacketInfo802_15_4P.nc:41: `cc2420_header_t' undeclared (first use in this function) /opt/tinyos-2.1.1/tos/lib/serial/SerialPacketInfo802_15_4P.nc:41: `cc2420_footer_t' undeclared (first use in this function) /opt/tinyos-2.1.1/tos/lib/serial/SerialPacketInfo802_15_4P.nc: In function `Info.upperLength': /opt/tinyos-2.1.1/tos/lib/serial/SerialPacketInfo802_15_4P.nc:44: `cc2420_header_t' undeclared (first use in this function) /opt/tinyos-2.1.1/tos/lib/serial/SerialPacketInfo802_15_4P.nc:44: `cc2420_footer_t' undeclared (first use in this function) In component `BaseStationC': BaseStationC.nc: At top level: BaseStationC.nc:107: component SerialDevConfC not found BaseStationC.nc:114: component IPAddressC not found BaseStationC.nc:108: no match BaseStationC.nc:109: no match BaseStationC.nc:115: no match BaseStationC.nc:118: no match make: ** [exe0] Erro 1 ________________________________________________________________________________ COFIDIS Maxicredito. Ate' €10.000 sem burocracias. Resposta on-line! Clique aqui para saber mais http://www.iol.pt/correio/rodape.php?dst=0802273 _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
