Hi,
When I try recompile IPBaseStation again, with low power listening
flag or not, have the following errors:
With CFLAGS += -DLOW_POWER_LISTENING:
root@carlos-laptop:/opt/tinyos-2.1.1/apps/IPBaseStation# make iris
blip install mib510,/dev/ttyUSB0
mkdir -p build/iris
compiling BaseStationC to a iris binary
ncc -o build/iris/main.exe -Os -DPACKET_LINK -DDEF_MEMCPY
-DENABLE_SPI0_DMA -DBLIP_MULTICAST -DCC2420_HW_ACKNOWLEDGEMENTS
-DTOSH_DATA_LENGTH=102
-I/home/carlos/tinyos-main-read-only/tos/lib/net/
-I/home/carlos/tinyos-main-read-only/support/sdk/c/blip/lib6lowpan/
-I/home/carlos/tinyos-main-read-only/support/sdk/c/blip/libtcp/
-I/home/carlos/tinyos-main-read-only/tos/lib/net/blip/
-I/home/carlos/tinyos-main-read-only/tos/lib/net/blip/interfaces/
-I/home/carlos/tinyos-main-read-only/tos/lib/net/blip/nwprog/
-I/home/carlos/tinyos-main-read-only/tos/lib/net/blip/shell/
-I/home/carlos/tinyos-main-read-only/tos/lib/net/blip/serial/
-I/home/carlos/tinyos-main-read-only/tos/lib/net/blip/platform/
/home/carlos/tinyos-main-read-only/support/sdk/c/blip/lib6lowpan/lib6lowpan.c
/home/carlos/tinyos-main-read-only/support/sdk/c/blip/lib6lowpan/lib6lowpanIP.c
/home/carlos/tinyos-main-read-only/support/sdk/c/blip/lib6lowpan/lib6lowpanFrag.c
/home/carlos/tinyos-main-read-only/support/sdk/c/blip/lib6lowpan/in_cksum.c
/home/carlos/tinyos-main-read-only/support/sdk/c/blip/lib6lowpan/ip_malloc.c
/home/carlos/tinyos-main-read-only/tos/lib/net/blip/table.c -fnesc-separator=__
-Wall -Wshadow -Wnesc-all -target=iris -fnesc-cfile=build/iris/app.c
-board=micasb -DDEFINED_TOS_AM_GROUP=0x22 --param
max-inline-insns-single=100000 -DNO_IP_MALLOC -DIEEE154FRAMES_ENABLED
-DLOW_POWER_LISTENING -DLPL_SLEEP_INTERVAL=512
-DIDENT_APPNAME=\"BaseStationC\" -DIDENT_USERNAME=\"root\"
-DIDENT_HOSTNAME=\"carlos-laptop\" -DIDENT_USERHASH=0x7033995aL
-DIDENT_TIMESTAMP=0x4d35bef0L -DIDENT_UIDHASH=0xaf44e3f3L -fnesc-dump=wiring
-fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs,
components)' -fnesc-dumpfile=build/iris/wiring-check.xml BaseStationC.nc
-lm
BaseStationP.nc:68:20: error: CC2420.h: No such file or directory
In file included from BaseStationC.nc:100:
In component `BaseStationP':
BaseStationP.nc:98: interface CC2420Config not found
In file included from BaseStationC.nc:100:
BaseStationP.nc: In function `ConfigureReceive.receive':
BaseStationP.nc:413: interface has no command or event named `setChannel'
BaseStationP.nc:416: interface has no command or event named `sync'
BaseStationP.nc: At top level:
BaseStationP.nc:434: `syncDone' is not in interface `CC2420Config'
/home/carlos/tinyos-main-read-only/tos/chips/rf2xx/rf230/RF230RadioC.nc:169:3:
warning: #warning "*** USING LOW POWER LISTENING LAYER"
Reset.h:56:2: error: #error "Reset.h not defined/supported for your
platform, aborting..."
In component `BaseStationC':
BaseStationC.nc:136: component CC2420ControlC not found
BaseStationC.nc:137: no match
make: ** [exe0] Erro 1
Without LPL flag:
root@carlos-laptop:/opt/tinyos-2.1.1/apps/IPBaseStation# make iris
blip install mib510,/dev/ttyUSB0
mkdir -p build/iris
compiling BaseStationC to a iris binary
ncc -o build/iris/main.exe -Os -DPACKET_LINK -DDEF_MEMCPY
-DENABLE_SPI0_DMA -DBLIP_MULTICAST -DCC2420_HW_ACKNOWLEDGEMENTS
-DTOSH_DATA_LENGTH=102
-I/home/carlos/tinyos-main-read-only/tos/lib/net/
-I/home/carlos/tinyos-main-read-only/support/sdk/c/blip/lib6lowpan/
-I/home/carlos/tinyos-main-read-only/support/sdk/c/blip/libtcp/
-I/home/carlos/tinyos-main-read-only/tos/lib/net/blip/
-I/home/carlos/tinyos-main-read-only/tos/lib/net/blip/interfaces/
-I/home/carlos/tinyos-main-read-only/tos/lib/net/blip/nwprog/
-I/home/carlos/tinyos-main-read-only/tos/lib/net/blip/shell/
-I/home/carlos/tinyos-main-read-only/tos/lib/net/blip/serial/
-I/home/carlos/tinyos-main-read-only/tos/lib/net/blip/platform/
/home/carlos/tinyos-main-read-only/support/sdk/c/blip/lib6lowpan/lib6lowpan.c
/home/carlos/tinyos-main-read-only/support/sdk/c/blip/lib6lowpan/lib6lowpanIP.c
/home/carlos/tinyos-main-read-only/support/sdk/c/blip/lib6lowpan/lib6lowpanFrag.c
/home/carlos/tinyos-main-read-only/support/sdk/c/blip/lib6lowpan/in_cksum.c
/home/carlos/tinyos-main-read-only/support/sdk/c/blip/lib6lowpan/ip_malloc.c
/home/carlos/tinyos-main-read-only/tos/lib/net/blip/table.c -fnesc-separator=__
-Wall -Wshadow -Wnesc-all -target=iris -fnesc-cfile=build/iris/app.c
-board=micasb -DDEFINED_TOS_AM_GROUP=0x22 --param
max-inline-insns-single=100000 -DNO_IP_MALLOC -DIEEE154FRAMES_ENABLED
-DIDENT_APPNAME=\"BaseStationC\" -DIDENT_USERNAME=\"root\"
-DIDENT_HOSTNAME=\"carlos-laptop\" -DIDENT_USERHASH=0x7033995aL
-DIDENT_TIMESTAMP=0x4d35c1cdL -DIDENT_UIDHASH=0x3252b3c0L -fnesc-dump=wiring
-fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs,
components)' -fnesc-dumpfile=build/iris/wiring-check.xml BaseStationC.nc
-lm
BaseStationP.nc:68:20: error: CC2420.h: No such file or directory
In file included from BaseStationC.nc:100:
In component `BaseStationP':
BaseStationP.nc:98: interface CC2420Config not found
In file included from BaseStationC.nc:100:
BaseStationP.nc: In function `ConfigureReceive.receive':
BaseStationP.nc:413: interface has no command or event named `setChannel'
BaseStationP.nc:416: interface has no command or event named `sync'
BaseStationP.nc: At top level:
BaseStationP.nc:434: `syncDone' is not in interface `CC2420Config'
Reset.h:56:2: error: #error "Reset.h not defined/supported for your
platform, aborting..."
In component `BaseStationC':
BaseStationC.nc:136: component CC2420ControlC not found
BaseStationC.nc:137: no match
make: ** [exe0] Erro 1
________________________________________________________________________________
COFIDIS Maxicredito. Ate' €10.000 sem burocracias. Resposta on-line!
Clique aqui para saber mais http://www.iol.pt/correio/rodape.php?dst=0802273
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
