Hi, Currently I have a question of Micaz smallest sending rate.
When I specified the packet size as 90 bytes and packet interval as 20 ms, I checked the received sequence id and found nearly only half of the transmitted packets were received. But when I decreased the packet size to 80 bytes, or increased packet interval to 25 ms, all packets were received. I was a little confused about this because I don't think the packet transmission was saturated at this stage. One explanation I can think of is maybe the Micaz hardware processing speed is not able to handle this much traffic. I wonder whether anybody else encountered similar situation as mine. Or what's your fastest sending rate when programming on Micaz. When I specified packet size as 20 bytes, the packet interval can be set as around 6ms. FYI, I use the timer function to trigger a packet transmission. Thanks for any suggestions. -- Best Regards, Jimmy _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
