Hi Luis, We have been using the Citric Camera motes http://www.eecs.berkeley.edu/~yang/software/CITRIC/index.html at Automatic Control in KTH, from UC Berkeley and they work very well.
Best, Jose > Message: 4 > Date: Sun, 13 Feb 2011 11:18:21 +0100 > From: Luis Size <[email protected]> > Subject: Re: [Tinyos-help] Multimedia Wireless sensor networks > To: Alex Chih Hu <[email protected]> > Cc: "[email protected]" > <[email protected]> > Message-ID: <[email protected]> > Content-Type: text/plain; charset="utf-8" > > Thank you for your answer. > > I just checked their website, however I don't think that I can take > pictures or videos with this solution. It do just detection. > > Have a good day > > Mail sent from iMail for iPhone > > Le 13 f?vr. 2011 ? 04:23, Alex Chih Hu <[email protected]> a > ?crit : > > > you have a look http://www.easysen.com/. > > > > Hope it help you. > > > > 2011/2/3 luis_size <[email protected]> > > Hi everyone, > > > > I'm a new phd student working on wsn for multimedia applications. I > want to set-up a testbed for testing my protocols. Have anyone worked > with video WSN ? can you guide me to a mote-camera (board ?) to design > a wsn with cameras ? > > > > I did some research before posting my question. I decided to use > imote2 plateform with the IMB400 board and I booked this from crossbow. > Unfortunately, after few month of waiting they told me that the imote2 > is no more available !!! > > > > Can you help me please ? Any advice is welcome. > > Thanks in advance. > > > > > > > > _______________________________________________ > > Tinyos-help mailing list > > [email protected] > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos- > help > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: https://www.millennium.berkeley.edu/pipermail/tinyos- > help/attachments/20110213/a4e6c776/attachment-0001.htm > > ------------------------------ > > Message: 5 > Date: Sun, 13 Feb 2011 18:15:30 +0100 > From: Nicole Chiesi <[email protected]> > Subject: Re: [Tinyos-help] obtaining ctp experiment results > To: Omprakash Gnawali <[email protected]> > Cc: [email protected] > Message-ID: > <[email protected] > m> > Content-Type: text/plain; charset="iso-8859-1" > > I am facing a situation where , I use the TestNetwork Application in > testbed > of about 45 telosb motes. I was trying to check the saturation point of > ctp. > I increased the packet rate to some 1 packet per second for about 15 > nodes > and one packet every 8s for > the rest 20 motes. I still have a very good delivery ratio of about 98 > percentage. > How much of data rate is ctp supposed to handle? > When I went down to 3packets /sec for the 15 nodes and one packet /8s > for > the rest of the nodes , then was only significant drop in the delivery > ratio > to about 74 percent. > I think the results I got are not accurate? i do not know if I did > something > wrong here? > Please leave your insight. > > Nicole > On Sat, Feb 12, 2011 at 11:43 PM, Nicole Chiesi > <[email protected]>wrote: > > > Thank you for the clarifications. > > I could not figure out how to calculate the duty cycle in the > experiments > > that used LPL and LPP. Could you please tell me how I can do it? > > thanks, > > > > Nicole > > > > > > On Wed, Feb 9, 2011 at 12:16 AM, Omprakash Gnawali < > > [email protected]> wrote: > > > >> On Mon, Feb 7, 2011 at 12:38 PM, Nicole Chiesi > <[email protected]> > >> wrote: > >> > I changed the sequence number to 16 bits .Thank you. > >> > I have another question. I see the CTP uses different macs. CSMA > and > >> Box-mac > >> > . How to specify each of those while performing the experiment. > How to > >> > distinguish which Mac is being used? > >> > >> Those two MACs refer to the same software. If you want to use a > >> different MAC (e.g., SpeckMac), you will have to follow instruction > >> that came with the software. For example, -DLSPECKMACD flag in the > >> Makefile. > >> > >> - om_p > >> > > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: https://www.millennium.berkeley.edu/pipermail/tinyos- > help/attachments/20110213/dfb6b49b/attachment-0001.htm > > ------------------------------ > > Message: 6 > Date: Sun, 13 Feb 2011 19:48:24 +0000 (GMT) > From: Mefteh Afef <[email protected]> > Subject: [Tinyos-help] (no subject) > To: [email protected] > Message-ID: <[email protected]> > Content-Type: text/plain; charset="utf-8" > > I need to implement AES algorithm in tinyos 2.x > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: https://www.millennium.berkeley.edu/pipermail/tinyos- > help/attachments/20110213/ecf5760f/attachment.htm > > ------------------------------ > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos- > help > > End of Tinyos-help Digest, Vol 94, Issue 32 > ******************************************* _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
