> Hi, > if I type "make telosb blip" in Ppprouter I obtain these errors:
The created application is too big for the telosb. Try setting PFLAGS += - DIN6_PREFIX=\"fec0::\" in the Makefile, so that the DHCP components are not wired in. Another option is to go for mspgcc4, as described in README.blip. Markus > nesc1: warning: calls to Ppp.getOutputFrame in PppPrintfP fan out, but > there is no combine function specified for the return type > /home/ema/local/src/blip-rpl-devel//tos/chips/msp430/usart/HplMsp430UsartI > nterrupts.nc: In function > `PlatformSerialHdlcUartP__streamFeeder_task__runTask': > /home/ema/local/src/blip-rpl-devel//tos//lib/ppp/PlatformSerialHdlcUartP.n > c:120: warning: `loadable_endp' might be used uninitialized in this > function msp430-ld: region text is full (build/telosb/main.exe section > .text) msp430-ld: section .vectors [0000ffe0 -> 0000ffff] overlaps section > .text [00004000 -> 000102c7] msp430-ld: build/telosb/main.exe: section > .vectors lma 0xffe0 overlaps previous sections make: *** [exe0] Errore 1 > > > this is my blip extra makefile: > > > # -*- makefile -*- > > PFLAGS += -DCC2420_HW_ACKNOWLEDGEMENTS > PFLAGS += -DCC2420_HW_ADDRESS_RECOGNITION > PFLAGS += -DPACKET_LINK -DBLIP_L2_RETRIES=3 > > ifdef BLIP_L2_MTU > PFLAGS += -DTOSH_DATA_LENGTH=$(BLIP_L2_MTU) > else > PFLAGS += -DTOSH_DATA_LENGTH=90 > endif > > ifndef LOWPAN_ROOT > LOWPAN_ROOT=$(TOSROOT) > endif > > PFLAGS+=-I$(TOSROOT)/tos/lib/net/ > PFLAGS+=-I$(LOWPAN_ROOT)/support/sdk/c/blip/ > PFLAGS+=-I$(LOWPAN_ROOT)/tos/lib/net/blip/ > PFLAGS+=-I$(LOWPAN_ROOT)/tos/lib/net/blip/interfaces/ > PFLAGS+=-I$(LOWPAN_ROOT)/tos/lib/net/blip/nwprog/ > PFLAGS+=-I$(LOWPAN_ROOT)/tos/lib/net/blip/shell/ > PFLAGS+=-I$(LOWPAN_ROOT)/tos/lib/net/blip/serial/ > PFLAGS+=-I$(LOWPAN_ROOT)/tos/lib/net/blip/platform/ > PFLAGS+=-I$(LOWPAN_ROOT)/tos/lib/net/blip/icmp/ > PFLAGS+=-I$(LOWPAN_ROOT)/tos/lib/net/blip/dhcp/ > > PFLAGS+=$(LOWPAN_ROOT)/support/sdk/c/blip/lib6lowpan/iovec.c > PFLAGS+=$(LOWPAN_ROOT)/support/sdk/c/blip/lib6lowpan/in_cksum.c > PFLAGS+=$(LOWPAN_ROOT)/support/sdk/c/blip/lib6lowpan/ip_malloc.c > PFLAGS+=$(LOWPAN_ROOT)/support/sdk/c/blip/lib6lowpan/utility.c > PFLAGS+=$(LOWPAN_ROOT)/tos/lib/net/blip/table.c > > > > Regards > Emanuele > > > From: [email protected] > > Date: Mon, 14 Feb 2011 09:23:38 -0800 > > Subject: Re: [Tinyos-help] blip/rpl IPBaseStation > > To: [email protected] > > CC: [email protected]; [email protected] > > > > Looks like you need the "blip" make extra -- "make telosb blip". > > > > Steve > > > > On Mon, Feb 14, 2011 at 8:03 AM, emanuele l <[email protected]> wrote: > > > Hi, > > > I'm using blip-rpl-devel now but when I try to compile PppRouter I > > > obtain some errors. This is my PATH environment: > > > > > > export PATH=$HOME/local/bin:$PATH > > > export TOSROOT=$HOME/local/src/blip-rpl-devel > > > export TOSDIR=$TOSROOT/tos/ > > > export MAKERULES=$TOSROOT/support/make/Makerules > > > export CLASSPATH=$TOSROOT/support/sdk/java/tinyos.jar:. > > > export PYTHONPATH=.:$TOSROOT/support/sdk/python:$PYTHONPATH > > > export PATH=$HOME/local/src/blip-rpl-devel/support/sdk/c:$PATH > > > export TOSCONTRIB=$HOME/local/src/tinyos-2.x-contrib > > > export LOWPAN_ROOT="$TOSCONTRIB/berkeley/blip-2.0" > > > export TOSMAKE_PATH="$LOWPAN_ROOT/support/make" > > > > > > > > > and these are errors related to PppRouter: > > > > > > root@ema-HP-Pavilion-dv6000-RY645EA-ABZ:~/local/src/blip-rpl-devel/apps > > > /PppRouter# make micaz > > > mkdir -p build/micaz > > > > > > compiling PppRouterC to a micaz binary > > > > > > ncc -o build/micaz/main.exe -Os -DRPL_ROUTING -DRPL_STORING_MODE > > > -I/home/ema/local/src/tinyos-2.x-contrib/berkeley/blip-2.0/tos/lib/net/ > > > rpl -I/home/ema/local/src/tinyos-2.x/tos//lib/ppp > > > -I/home/ema/local/src/tinyos-2.x/tos//lib/fragpool > > > -I/home/ema/local/src/tinyos-2.x/tos//lib/serialprintf > > > -I/home/ema/local/src/tinyos-2.x/tos//platforms/micaz/chips/msp430 > > > -fnesc-separator=__ -Wall -Wshadow -Wnesc-all -target=micaz > > > -fnesc-cfile=build/micaz/app.c -board=micasb > > > -DDEFINED_TOS_AM_GROUP=0x22 --param max-inline-insns-single=100000 > > > -DIDENT_APPNAME=\"PppRouterC\" -DIDENT_USERNAME=\"root\" > > > -DIDENT_HOSTNAME=\"ema-HP-Pavilion\" -DIDENT_USERHASH=0xa3d1d944L > > > -DIDENT_TIMESTAMP=0x4d59505bL > > > -DIDENT_UIDHASH=0xaf9e304dL -fnesc-dump=wiring > > > -fnesc-dump='interfaces(!abstract())' > > > -fnesc-dump='referenced(interfacedefs, components)' > > > -fnesc-dumpfile=build/micaz/wiring-check.xml PppRouterC.nc -lm > > > PppRouterC.nc:1:17: error: ppp.h: No such file or directory > > > PppRouterP.nc:3:27: error: lib6lowpan/ip.h: No such file or directory > > > PppRouterP.nc:4:31: error: lib6lowpan/nwbyte.h: No such file or > > > directory PppRouterP.nc:5:34: error: lib6lowpan/ip_malloc.h: No such > > > file or directory PppRouterP.nc:6:19: error: dhcp6.h: No such file or > > > directory > > > PppRouterP.nc:7:24: error: PrintfUART.h: No such file or directory > > > In file included from PppRouterC.nc:5: > > > In component `PppRouterP': > > > PppRouterP.nc:11: interface IPForward not found > > > In file included from PppRouterC.nc:5: > > > PppRouterP.nc:15: interface MultiLed not found > > > In file included from PppRouterC.nc:5: > > > PppRouterP.nc:18: interface LcpAutomaton not found > > > PppRouterP.nc:19: interface PppIpv6 not found > > > PppRouterP.nc:21: interface ForwardingTable not found > > > PppRouterP.nc:22: interface RootControl not found > > > PppRouterP.nc:23: interface Dhcp6Info not found > > > PppRouterP.nc:28: `linkUp' is not in interface `PppIpv6' > > > PppRouterP.nc:29: `linkDown' is not in interface `PppIpv6' > > > PppRouterP.nc:31: syntax error before `state' > > > PppRouterP.nc:31: `transitionCompleted' is not in interface > > > `Ipv6LcpAutomaton' > > > PppRouterP.nc:32: `thisLayerUp' is not in interface `Ipv6LcpAutomaton' > > > PppRouterP.nc:33: `thisLayerDown' is not in interface > > > `Ipv6LcpAutomaton' PppRouterP.nc:34: `thisLayerStarted' is not in > > > interface `Ipv6LcpAutomaton' PppRouterP.nc:35: `thisLayerFinished' is > > > not in interface `Ipv6LcpAutomaton' PppRouterP.nc: In function > > > `IPControl.startDone': > > > PppRouterP.nc:44: implicit declaration of function `inet_pton6' > > > PppRouterP.nc:44: `DH6ADDR_ALLAGENT' undeclared (first use in this > > > function) PppRouterP.nc:44: (Each undeclared identifier is reported > > > only once PppRouterP.nc:44: for each function it appears in.) > > > PppRouterP.nc:45: interface has no command or event named `addRoute' > > > PppRouterP.nc:45: invalid use of undefined type `struct in6_addr' > > > PppRouterP.nc:45: `ROUTE_IFACE_PPP' undeclared (first use in this > > > function) PppRouterP.nc:48: interface has no command or event named > > > `addRoute' PppRouterP.nc: In function `Boot.booted': > > > PppRouterP.nc:56: interface has no command or event named `open' > > > PppRouterP.nc:62: interface has no command or event named `setRoot' > > > PppRouterP.nc:65: interface has no command or event named `useUnicast' > > > PppRouterP.nc: At top level: > > > PppRouterP.nc:72: `receive' is not in interface `PppIpv6' > > > PppRouterP.nc: In function `PppIpv6.receive': > > > PppRouterP.nc:74: arithmetic on pointer to an incomplete type > > > PppRouterP.nc:75: interface has no command or event named `toggle' > > > PppRouterP.nc:76: interface has no command or event named `recv' > > > PppRouterP.nc: At top level: > > > PppRouterP.nc:82: warning: `struct in6_addr' declared inside parameter > > > list PppRouterP.nc:82: warning: its scope is only this definition or > > > declaration, PppRouterP.nc:82: warning: which is probably not what you > > > want. PppRouterP.nc:82: warning: `struct ip6_packet' declared inside > > > parameter list > > > PppRouterP.nc:82: `send' is not in interface `IPForward' > > > PppRouterP.nc: In function `IPForward.send': > > > PppRouterP.nc:84: implicit declaration of function `iov_len' > > > PppRouterP.nc:84: invalid use of undefined type `struct ip6_packet' > > > PppRouterP.nc:87: interface has no command or event named `linkIsUp' > > > PppRouterP.nc:90: implicit declaration of function `ip_malloc' > > > PppRouterP.nc:90: sizeof applied to an incomplete type > > > PppRouterP.nc:90: warning: assignment makes pointer from integer > > > without a cast > > > PppRouterP.nc:94: invalid use of undefined type `struct ip6_packet' > > > PppRouterP.nc:94: sizeof applied to an incomplete type > > > PppRouterP.nc:95: implicit declaration of function `iov_read' > > > PppRouterP.nc:95: invalid use of undefined type `struct ip6_packet' > > > PppRouterP.nc:95: sizeof applied to an incomplete type > > > PppRouterP.nc:96: interface has no command or event named `toggle' > > > PppRouterP.nc:97: interface has no command or event named `transmit' > > > PppRouterP.nc:97: sizeof applied to an incomplete type > > > PppRouterP.nc:98: implicit declaration of function `ip_free' > > > In component `PppRouterC': > > > PppRouterC.nc: At top level: > > > PppRouterC.nc:10: component LedC not found > > > PppRouterC.nc:13: component PppDaemonC not found > > > PppRouterC.nc:16: component PppIpv6C not found > > > PppRouterC.nc:17: component's specification has no element named > > > `ControlProtocol' > > > PppRouterC.nc:18: component's specification has no element named > > > `Protocol' PppRouterC.nc:24: component PlatformSerialHdlcUartC not > > > found > > > PppRouterC.nc:28: component PppPrintfC not found > > > PppRouterC.nc:28: component PppC not found > > > PppRouterC.nc:30: component's specification has no element named > > > `Protocol' PppRouterC.nc:33: component IPStackC not found > > > PppRouterC.nc:33: component IPForwardingEngineP not found > > > PppRouterC.nc:34: `ROUTE_IFACE_PPP' undeclared here (not in a function) > > > PppRouterC.nc:39: component RPLRoutingC not found > > > PppRouterC.nc:50: component Dhcp6ClientC not found > > > PppRouterC.nc:11: no match > > > PppRouterC.nc:14: no match > > > PppRouterC.nc:17: cannot find `PppControlProtocol' > > > PppRouterC.nc:18: cannot find `PppProtocol' > > > PppRouterC.nc:19: cannot find `Ppp' > > > PppRouterC.nc:20: cannot find `LowerLcpAutomaton' > > > PppRouterC.nc:21: no match > > > PppRouterC.nc:22: no match > > > PppRouterC.nc:25: cannot find `HdlcUart' > > > PppRouterC.nc:26: cannot find `UartControl' > > > PppRouterC.nc:29: cannot find `Ppp' > > > PppRouterC.nc:30: cannot find `PppProtocol' > > > PppRouterC.nc:31: cannot find `Ppp' > > > PppRouterC.nc:34: cannot find `IPForward' > > > PppRouterC.nc:35: no match > > > PppRouterC.nc:36: no match > > > PppRouterC.nc:40: no match > > > PppRouterC.nc:51: no match > > > make: *** [exe0] Errore 1 > > > root@ema-HP-Pavilion-dv6000-RY645EA-ABZ:~/local/src/blip-rpl-devel/apps > > > /PppRouter# source /home/ema/.bashrc > > > root@ema-HP-Pavilion-dv6000-RY645EA-ABZ:~/local/src/blip-rpl-devel/apps > > > /PppRouter# make micaz > > > mkdir -p build/micaz > > > > > > compiling PppRouterC to a micaz binary > > > > > > ncc -o build/micaz/main.exe -Os -DRPL_ROUTING -DRPL_STORING_MODE > > > -I/home/ema/local/src/tinyos-2.x-contrib/berkeley/blip-2.0/tos/lib/net/ > > > rpl -I/home/ema/local/src/blip-rpl-devel/tos//lib/ppp > > > -I/home/ema/local/src/blip-rpl-devel/tos//lib/fragpool > > > -I/home/ema/local/src/blip-rpl-devel/tos//lib/serialprintf > > > -I/home/ema/local/src/blip-rpl-devel/tos//platforms/micaz/chips/msp430 > > > -fnesc-separator=__ -Wall -Wshadow -Wnesc-all -target=micaz > > > -fnesc-cfile=build/micaz/app.c -board=micasb > > > -DDEFINED_TOS_AM_GROUP=0x22 --param max-inline-insns-single=100000 > > > -DIDENT_APPNAME=\"PppRouterC\" -DIDENT_USERNAME=\"root\" > > > -DIDENT_HOSTNAME=\"ema-HP-Pavilion\" -DIDENT_USERHASH=0xa3d1d944L > > > -DIDENT_TIMESTAMP=0x4d5950e6L > > > -DIDENT_UIDHASH=0x349bd0f3L -fnesc-dump=wiring > > > -fnesc-dump='interfaces(!abstract())' > > > -fnesc-dump='referenced(interfacedefs, components)' > > > -fnesc-dumpfile=build/micaz/wiring-check.xml PppRouterC.nc -lm > > > PppRouterP.nc:3:27: error: lib6lowpan/ip.h: No such file or directory > > > PppRouterP.nc:4:31: error: lib6lowpan/nwbyte.h: No such file or > > > directory PppRouterP.nc:5:34: error: lib6lowpan/ip_malloc.h: No such > > > file or directory PppRouterP.nc:6:19: error: dhcp6.h: No such file or > > > directory > > > PppRouterP.nc:7:24: error: PrintfUART.h: No such file or directory > > > In file included from PppRouterC.nc:5: > > > In component `PppRouterP': > > > PppRouterP.nc:11: interface IPForward not found > > > In file included from PppRouterC.nc:5: > > > PppRouterP.nc:21: interface ForwardingTable not found > > > PppRouterP.nc:22: interface RootControl not found > > > PppRouterP.nc:23: interface Dhcp6Info not found > > > PppRouterP.nc: In function `IPControl.startDone': > > > PppRouterP.nc:44: implicit declaration of function `inet_pton6' > > > PppRouterP.nc:44: `DH6ADDR_ALLAGENT' undeclared (first use in this > > > function) PppRouterP.nc:44: (Each undeclared identifier is reported > > > only once PppRouterP.nc:44: for each function it appears in.) > > > PppRouterP.nc:45: interface has no command or event named `addRoute' > > > PppRouterP.nc:45: invalid use of undefined type `struct in6_addr' > > > PppRouterP.nc:45: `ROUTE_IFACE_PPP' undeclared (first use in this > > > function) PppRouterP.nc:48: interface has no command or event named > > > `addRoute' PppRouterP.nc: In function `Boot.booted': > > > PppRouterP.nc:62: interface has no command or event named `setRoot' > > > PppRouterP.nc:65: interface has no command or event named `useUnicast' > > > PppRouterP.nc: In function `PppIpv6.receive': > > > PppRouterP.nc:74: arithmetic on pointer to an incomplete type > > > PppRouterP.nc:76: interface has no command or event named `recv' > > > PppRouterP.nc: At top level: > > > PppRouterP.nc:82: warning: `struct in6_addr' declared inside parameter > > > list PppRouterP.nc:82: warning: its scope is only this definition or > > > declaration, PppRouterP.nc:82: warning: which is probably not what you > > > want. PppRouterP.nc:82: warning: `struct ip6_packet' declared inside > > > parameter list > > > PppRouterP.nc:82: `send' is not in interface `IPForward' > > > PppRouterP.nc: In function `IPForward.send': > > > PppRouterP.nc:84: implicit declaration of function `iov_len' > > > PppRouterP.nc:84: invalid use of undefined type `struct ip6_packet' > > > PppRouterP.nc:90: implicit declaration of function `ip_malloc' > > > PppRouterP.nc:90: sizeof applied to an incomplete type > > > PppRouterP.nc:90: warning: assignment makes pointer from integer > > > without a cast > > > PppRouterP.nc:94: invalid use of undefined type `struct ip6_packet' > > > PppRouterP.nc:94: sizeof applied to an incomplete type > > > PppRouterP.nc:95: implicit declaration of function `iov_read' > > > PppRouterP.nc:95: invalid use of undefined type `struct ip6_packet' > > > PppRouterP.nc:95: sizeof applied to an incomplete type > > > PppRouterP.nc:97: sizeof applied to an incomplete type > > > PppRouterP.nc:98: implicit declaration of function `ip_free' > > > /home/ema/local/src/blip-rpl-devel/tos/system/LedC.nc:32:25: error: > > > PlatformLed.h: No such file or directory > > > In file included from PppRouterC.nc:10: > > > In component `LedC': > > > /home/ema/local/src/blip-rpl-devel/tos/system/LedC.nc: At top level: > > > /home/ema/local/src/blip-rpl-devel/tos/system/LedC.nc:88: component > > > PlatformLedC not found > > > /home/ema/local/src/blip-rpl-devel/tos/system/LedC.nc:89: no match > > > In file included from > > > /home/ema/local/src/blip-rpl-devel/tos/lib/timer/MuxAlarmMilli32C.nc:47 > > > , > > > > > > from > > > > > > /home/ema/local/src/blip-rpl-devel/tos//lib/ppp/LcpAutomatonC.nc:72, > > > > > > from > > > > > > /home/ema/local/src/blip-rpl-devel/tos//lib/ppp/LinkControlProtocolC.nc > > > :89, > > > > > > from > > > > > > /home/ema/local/src/blip-rpl-devel/tos//lib/ppp/PppDaemonC.nc:65, > > > > > > from PppRouterC.nc:13: > > > In component `MuxAlarmMilli32C_': > > > /home/ema/local/src/blip-rpl-devel/tos/lib/timer/MuxAlarmMilli32C_.nc:5 > > > 5: component AlarmMilli32C not found > > > /home/ema/local/src/blip-rpl-devel/tos/lib/timer/MuxAlarmMilli32C_.nc:5 > > > 5: component `AlarmMilli32C' is not generic > > > /home/ema/local/src/blip-rpl-devel/tos/lib/timer/MuxAlarmMilli32C_.nc:5 > > > 6: no match > > > In component `PppRouterC': > > > PppRouterC.nc:33: component IPStackC not found > > > PppRouterC.nc:33: component IPForwardingEngineP not found > > > PppRouterC.nc:34: `ROUTE_IFACE_PPP' undeclared here (not in a function) > > > PppRouterC.nc:39: component RPLRoutingC not found > > > PppRouterC.nc:50: component Dhcp6ClientC not found > > > PppRouterC.nc:34: cannot find `IPForward' > > > PppRouterC.nc:35: no match > > > PppRouterC.nc:36: no match > > > PppRouterC.nc:40: no match > > > PppRouterC.nc:51: no match > > > make: *** [exe0] Errore 1 > > > > > > > > > Regards > > > Emanuele > > > > > >> Date: Mon, 14 Feb 2011 16:46:59 +0100 > > >> From: [email protected] > > >> To: [email protected] > > >> Subject: Re: [Tinyos-help] blip/rpl IPBaseStation > > >> > > >> > Hi, > > >> > I would like to study new blip and rpl's implementation but > > >> > > >> > IPBaseStation app gives me some errors: > > >> Are you using the code from the blip-rpl-devel branch? In this case, > > >> you have to build PppRouter as basestation. You can find the > > >> installation instructions under blip-rpl-devel/README.blip. > > >> > > >> If you are using tinyos 2.1.1, build the IPBaseStation app with: > > >> > > >> make tmote blip install > > >> > > >> http://docs.tinyos.net/index.php/BLIP_Tutorial > > >> > > >> Tobias > > > > > > _______________________________________________ > > > Tinyos-help mailing list > > > [email protected] > > > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-hel > > > p ------------------------------------------------ | Dipl.-Ing. Markus Becker | Communication Networks | Mobile Research Center | TZI - Center for Computing Technologies | University Bremen | Germany ------------------------------------------------ | web: http://www.comnets.uni-bremen.de/~mab/ | mailto: [email protected] | telephone: +49 421 218 62379 | building: NW1 room: N2260 ------------------------------------------------ _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
