Hi Erwan, Take a look at the examples in the tinyos-2.x-contrib/shimmer/apps folder for examples on how to sample the shimmer sensors: http://tinyos.cvs.sourceforge.net/viewvc/tinyos/tinyos-2.x-contrib/shimmer/apps/
SimpleAccel being, as the name suggests, one of the simpler examples. Mike On Mon, Mar 21, 2011 at 8:41 AM, Erwan RENAUDO <[email protected]>wrote: > Hi, > > Thanks for your intention. I'm not using BLIP currently first because I'm > only working with one mote, then because it seems not to be completely > operating on shimmer platform I use. > > Anyway, I think sensing issue is not dependant on the radio solution we > choose. I followed Sensing and Oscilloscope tutorial and what I understand > is that the virtual representation of the sensor is done in DemoSensor. The > basic implementation provides "simulation values". If we want values from > sensor, we have to change this implementation. There is an "Accel" file in > tos/platforms/shimmer2r/chips/mma7361 that I suppose to be my sensor > virtualization. But interface provided is not the same as Demosensor so I'm > not sure this one have to be directly implemented ... I tried to change the > "PhotoC as Sensor" to "AccelC as Sensor", but it changed nothing, so I > wondered about compiling again this file ... > > If you have some idea / you know something that I forget / have any > suggestion, I would be glad to try ... > > By the way, where are you stuck / what problems are you experiencing, I > maybe am able to help you ? > > Regards, > Erwan > > > 2011/3/18 ssa ss <[email protected]> > >> i hoped if i could help you >> >> but i get stuck into sensing a from one sensor and collect that infomation >> by using BLIP. I depand on some tutorials , any suggestion matirials for >> help >> >> >> by the way : i use Telosb sensor >> ------------------------------ >> Date: Fri, 18 Mar 2011 16:19:09 +0100 >> From: [email protected] >> To: [email protected] >> Subject: [Tinyos-help] Shimmer - getting info from sensor. >> >> >> Hi everybody, >> >> Going through tutorials allowed me to be able to communicate on serial >> through USB with Shimmer mote. I successfully get datas from it and I know >> have several question about sensing. I read that sensing data come from >> Demosensor, and depending on which component it implements, I should be able >> to get what I want. >> - Which components allow access to Accelerometer axis ? >> - Does Demosensor need to be in some way compiled again after modification >> (if yes, how could I do that ?) ? >> - If I'm completely wrong, I could I proceed to get data from real sensor >> (could you indicate where I can find infos ? RingTFM is always a good way to >> progress ;) )? >> >> Thanks all of you for support and answering, >> Erwan >> >> PS : I'm using XubunTOS and tinyos2. >> >> -- >> Master Student / Élève Ingénieur Promo 2011 - Section *Informatique et >> Systèmes*. >> École Nationale Supérieure de l'Électronique et de ses Applications (* >> E.N.S.E.A.* - Cergy) >> >> >> _______________________________________________ Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> > > > > -- > Élève Ingénieur Promo 2011 - Section *Informatique et Systèmes*. > École Nationale Supérieure de l'Électronique et de ses Applications (* > E.N.S.E.A.* - Cergy) > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
