Hi Nelson,
Apologize my previus email. I'm just trying to measure the throughput in a single hop network. Thanks for the information about the paper, I've already read it before I posted. Nevertheless, I'm using IRIS, not MicaZ, that's the reason I asked for advice. Thanks for your time. Cheers David > Date: Wed, 23 Mar 2011 11:00:20 +0100 > From: [email protected] > To: [email protected] > CC: [email protected] > Subject: Re: [Tinyos-help] Maximum Throughput > > Hello David, > > It is not very clear what architecture you are working with. May be IRIS? In > case you are using micaZ, you may check a paper > > Analysis of IEEE 802.15.4 Throughput in Beaconless Mode on micaZ under TinyOS > 2 > http://dx.doi.org/10.1109/VETECF.2010.5594493 > > which dealt with maximum throughput on a micaz p2p link. > > Cheers, > > Nelson > > > -------- Original Message -------- > > Message: 4 > Date: Tue, 22 Mar 2011 12:24:33 +0000 > From: Correo de Wacka <[email protected]> > Subject: [Tinyos-help] Maximum Throughput > To: <[email protected]> > Message-ID: <[email protected]> > Content-Type: text/plain; charset="iso-8859-1" > > > > Hi all!, > > Has anyone be able to reach 250 kbps as throughput? I've realized that it's > the maximum, but, it's only theorical, how could I get the highest value? the > bitrate of the serial forwarder ( 57600 bps with IRIS motes) is relevant? I > mean, may be this value prevent to reach the maximum.. > > Tips or suggestions are welcomed > > Cheers > > David > > > > >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
