On Thu, Mar 24, 2011 at 8:42 PM, lue ikhong <[email protected]> wrote: > When i hooked up the mote 1 to UART, there is no debug message but packets > of data, > 00 FF FF 00 00 09 00 16 20 00 07 00 00 00 00 00 1A > 00 FF FF 00 00 09 00 16 50 00 00 00 00 00 00 00 1B > 00 FF FF 00 00 09 00 16 33 FF FF 00 00 00 00 00 09 > any clue?
These are debug messages. This debug message tells me that you have programmed your mote 1 with id 0. Try programming your mote 1 with id 1 and if that does not work, collect these messages (from UART for mote 0 as well as 1) for a while and send it again. Send at least 20 or 30 consecutive lines of these messages. - om_p _______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
