hi,
I'm getting following error when trying to program mica2 mote using
mib510 programming board connected with laptop by usb to serial
connector:sumit@sumit-laptop:
/opt/tinyos-2.1.1/apps/Blink$ make mica2 reinstall mib510,/dev/ttyUSB0
cp build/mica2/main.srec build/mica2/main.srec.out
installing mica2 binary using mib510
uisp -dprog=mib510 -dserial=/dev/ttyUSB0 --wr_fuse_h=0xd9
-dpart=ATmega128 --wr_fuse_e=ff --erase --upload
if=build/mica2/main.srec.out --verify
Firmware Version: 2.1
Programmer is not responding.
make: *** [program] Error 2
sumit@sumit-laptop:/opt/tinyos-2.1.1/apps/Blink$
kindly help on it?
Thanking you in anticipation.
regards
sumit
_______________________________________________
Tinyos-help mailing list
[email protected]
https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
