Hi All, I compiled and loaded Surge_Reliable application into two micaz motes by giving them ID 0 and 1 as per instructions using cygwin. During compilation and burning the app into the motes there were many warnings but no errors. Then I wanted to see how Surge_Reliable app works in multihop routing. So, Mote with ID 0 is connected to Mib520 programming board to work as a Base station and mote with ID 1 powered on using batteries. Now I wanted to see the routing information using "Surge-View". Firstly, I ran "SerialForwarder". I ran the serialforwarder for COM4 since I could burn the app into the mote using "make micaz install.0 mib510,/dev/ttyS3" SerialForwarder gives me the following output Listening to serial@COM4 Listening for client connections on port 9001 serial@COM4:19200: resynchronising I came to know that it means COM4 is not listening or not connected? Then I ran "Surge 125" and GUI appeared but there is no mote and other information in that GUI. Can anyone pls tell me what am I doing wrong. I would appreciate if you kindly help me running this application properly. If there is anyone who could run Surge_Reliable apps? Thanks. Nazmul
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
