Hi, My only idea is that you might not be correctly enabling the 5V regulator on the AnEx boards (as it's on/off state can be controlled by the MSP430).
The SER0_RTS pin controls the 5V reg. So in Boot.booted() (or somewhere else appropriate) you need to set this pin to it's I/O mode, and set it as an output. This is done with the following two commands: TOSH_MAKE_SER0_RTS_OUTPUT(); TOSH_SEL_SER0_RTS_IOFUNC(); Then to enable the 5V reg, possibly also in Boot.booted() or, again, where ever is appropriate in your app, you call: TOSH_SET_SER0_RTS_PIN(); and if you need to disable it at any stage you can call: TOSH_CLR_SER0_RTS_PIN(); Mike On Tue, Jun 7, 2011 at 5:56 PM, Jheisson Argiro López Restrepo < [email protected]> wrote: > I have a problem whit a mote shimmer2r, I tried to supply a temperature > sensor that need +5V and -5V, but the ANEX of the shimmer dosen't work, is > very strange, in some motes (shimmer2r) it work, but in others it dosen't > work. Someone hava any idea? > > Many Thanks. > > -- > Jheisson Argiro López Restrepo > Ingeniero Electrónico > Universidad de Antioquia. > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
