Dear Junaid, When you say USB bootloeader, do you mean that you are using OpenOCD with the corresponding Olimex board for programming the imote2? In such a case, what is the output of "openocd f /usr/local/share/openocd/scripts/interface/olimexarmusb tinyh.cfg f /usr/local/share/openocd/scripts/board/crossbow_tech_imote2.cfg" ?
Or rather you mean that using only a USB cable would do the work? It sounds very good, but I have no experience with that... Cheers! Sergio On Sat, Jun 11, 2011 at 6:45 PM, Junaid Ahmad <[email protected]>wrote: > Hi All, > > I am using tinyos-2.x in windows XP. > > I am running symple application Blink. > > But when i load it on intelmote2 using USB bootloader. The > USB device mostly doesnt detects and if it detects the program becomes > successful but the desired program of BLINK does not runs on the intelmote2. > > The RED led doent blinks. So please help me in solving thsi > problem. > > Best Regards > > > -- > _________________________ > > Junaid Ahmad > Research Officer & MS Student > Department of Electrical & Electronic Engineering > Universiti Teknologi PETRONAS > Bander Seri Iskander, Tronoh 31750, Perak, Malaysia > Cell no: 0194048600 > > > _______________________________________________ > Tinyos-help mailing list > [email protected] > https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
