Everything works great with Stanford lucid repository. Thank you for your reply and help.
best regards, Faisal Aslam On Tue, Jul 26, 2011 at 7:20 AM, Eric Decker <[email protected]> wrote: > > > On Mon, Jul 25, 2011 at 4:04 PM, Faisal Aslam <[email protected]>wrote: > >> Hi all, >> >> I will really appreciate your help. I am not new to TinyOS and has been >> using it since many years. >> However I am stunk while trying to install it on a new a new laptop. Here >> are the details. >> >> Synaptic Package Manager under Ubuntu 10.10 gives following error when I >> add TinyOS repository. >> >> "Failed to fetch >> http://hinrg.cs.jhu.edu/tinyos/dists/maverick/main/source/Sources.gz >> 404 Not Found >> Some index files failed to download, they have been ignored, or old ones >> used instead." >> > > source archives are yet available. working on it but don't have the staff > to make it happen in a reasonable time frame > (nor has there been a lot of demand for it). > > Sorry about that. Stanford had problems and we tried to back them up at > hinrg. But didn't get everything right. > > Either try switching your apt source string from maverick to lucid and/or > try stanford. > > deb http://tinyos.stanford.edu/tinyos/dists/ubuntu lucid main > > I suspect if you change from > > deb http://hinrg.cs.jhu.edu/tinyos/dists maverick main > > to > > deb http://hinrg.cs.jhu.edu/tinyos/dists lucid main > > > it might work. But I don't understand the failure mechanism so can't say > for sure. > > > >> >> I continued my installation ignoring above then apparently everything went >> Okay but I cannot compile Blink. See below >> > > hard to say and probably not worth tracking down. Try changing the pull > strings and see what happens. > > > I'd say get the source pull followed by package installation and try again. > Missing inttypes.h is pretty basic and I'm pretty sure for the mica comes > from one of the avr packages from tinyos. > > eric > > >> >> aslam@aslam-Lenovo-G565:/opt/tinyos-2.1.1/apps/Blink$ make mica2 >> mkdir -p build/mica2 >> compiling BlinkAppC to a mica2 binary >> ncc -o build/mica2/main.exe -Os -fnesc-separator=__ -Wall -Wshadow >> -Wnesc-all -target=mica2 -fnesc-cfile=build/mica2/app.c -board=micasb >> -DDEFINED_TOS_AM_GROUP=0x22 --param max-inline-insns-single=100000 >> -DIDENT_APPNAME=\"BlinkAppC\" -DIDENT_USERNAME=\"aslam\" >> -DIDENT_HOSTNAME=\"aslam-Lenovo-G5\" -DIDENT_USERHASH=0xd2e011d5L >> -DIDENT_TIMESTAMP=0x4e2df51fL -DIDENT_UIDHASH=0x5fdce2caL -fnesc-dump=wiring >> -fnesc-dump='interfaces(!abstract())' -fnesc-dump='referenced(interfacedefs, >> components)' -fnesc-dumpfile=build/mica2/wiring-check.xml BlinkAppC.nc -lm >> /usr/lib/ncc/nesc_nx.h:16:22: error: inttypes.h: No such file or directory >> /usr/lib/ncc/nesc_nx.h:235: syntax error before `__nesc_ntoh_uint8' >> /usr/lib/ncc/nesc_nx.h:240: syntax error before `__nesc_hton_uint8' >> /usr/lib/ncc/nesc_nx.h:242: warning: type defaults to `int' in declaration >> of `base' >> /usr/lib/ncc/nesc_nx.h:242: `value' undeclared here (not in a function) >> /usr/lib/ncc/nesc_nx.h:242: warning: data definition has no type or >> storage class >> /usr/lib/ncc/nesc_nx.h:243: syntax error before `return' >> /usr/lib/ncc/nesc_nx.h:246: syntax error before `__nesc_ntoh_leuint8' >> /usr/lib/ncc/nesc_nx.h:251: syntax error before `__nesc_hton_leuint8' >> /usr/lib/ncc/nesc_nx.h:253: warning: type defaults to `int' in declaration >> of `base' >> /usr/lib/ncc/nesc_nx.h:253: redefinition of `base' >> /usr/lib/ncc/nesc_nx.h:242: previous declaration of `base' >> /usr/lib/ncc/nesc_nx.h:253: `value' undeclared here (not in a function) >> /usr/lib/ncc/nesc_nx.h:253: warning: data definition has no type or >> storage class >> /usr/lib/ncc/nesc_nx.h:254: syntax error before `return' >> /usr/lib/ncc/nesc_nx.h:257: syntax error before `__nesc_ntoh_int8' >> /usr/lib/ncc/nesc_nx.h:257: syntax error before `__nesc_hton_int8' >> /usr/lib/ncc/nesc_nx.h:257: syntax error before `__nesc_ntoh_leint8' >> /usr/lib/ncc/nesc_nx.h:257: syntax error before `__nesc_hton_leint8' >> /usr/lib/ncc/nesc_nx.h:258: syntax error before `__nesc_bf_decode8' >> >> >> Above error is cut short as it continues for a long time. Any hints >> please? >> >> Thank you, >> Faisal Aslam >> >> _______________________________________________ >> Tinyos-help mailing list >> [email protected] >> https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help >> > > > > -- > Eric B. Decker > Senior (over 50 :-) Researcher > > >
_______________________________________________ Tinyos-help mailing list [email protected] https://www.millennium.berkeley.edu/cgi-bin/mailman/listinfo/tinyos-help
